Hydraulic plate shears

EHT TSS 3-40

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Drivetrain Drive: Wheel Weights Empty weight: 27.875 kg Functional Lifting capacity: 23.800 kg Identification Serial number: 122024 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 11.1x2.55x3.9 Additional information Rsdpfx Aow A Hcdjgzjl Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. Redpfxsp Stgne Agzjl As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: used, Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm speed BW 90.0 Grad/sec work height max. 900 mm control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h total power requirement 2x 4.0 kW voltage 400 V weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram Rodpfx Agexabz Tozjl

Condition: excellent (used), EHT Guillotine Shears Brand: Eisen u. Hammerwerk (EHT) Type: ASS 8-30 Year of manufacture: 1967 Serial number: 10625 Rodpfx Aewc Rgaogzel Cutting length: 3000 mm Max. sheet thickness: 8 mm Motor power: 11 kW Connection: 380 V Dimensions: 3950 x 3100 x 1900 mm

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm Redpsr Ngtiofx Agzel 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

Condition: good (used), Used hydraulic shear brand SCHIAVI, mod. GH540A Rsdpjqfc Imsfx Agzel Useful cutting length mm 4040 Cutting thickness 5 mm Motorized rear register stroke mm 1000 Lateral recess 500 mm Min strokes 20-55 Cutting angle variation 0° 29" - 1° 14" Manual blade gap adjustment Three-phase current 380V Main motor power Kw 9 Overall dimensions mm L 4570 mm x l 2310 mm x h 1705 mm Approximate weight Kg 11000 Good condition viewable

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Rodpeuagxpjfx Agzsl Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Rsdpfjw T Sc Aox Agzol Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: excellent (used), mileage: 669,712 km, power: 375 kW (509.86 HP), first registration: 12/2013, fuel type: diesel, axle configuration: 8x2, wheelbase: 5,670 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 8,350 mm, total width: 2,500 mm, Year of construction: 2013, Equipment: AdBlue, air conditioning, airbag, electric window regulation, fridge, = Additional Options and Equipment = - Enclosed cab - Air suspension Rjdew Nqt Sopfx Agzel - Sun visor - Power take-off (PTO) - Power take-off (PTO) = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Gearbox: I-Shift, automatic Axle configuration Front axle: Max. axle load: 9,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Max. axle load: 9,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Max. axle load: 11,500 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Lift axle; Max. axle load: 7,500 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 24,260 kg Payload: 12,740 kg Gross vehicle weight: 37,000 kg Functional Crane: HIAB 855-E6 Hipro, year of manufacture 2014, mounted behind the cab Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information Please contact John de Koning or Mark de Koning for further information.

Condition: new, Year of construction: 2024, Genie GS5390 diesel scissor lift with all-wheel drive, new, used, demonstration machines available Redporh Euwofx Agzel