EMMA CF-1 Atmospheric filler (2020)

EMMA Atmosphärischer Füller

Condition: used, Year of construction: 2022, Overview This Gravity Filler for Cans was manufactured in 2022 by Italian company Emma. The machine has never been used and is immediately available. It is designed for small-scale can filling, particularly suited for 15 cl and 25 cl slim cans, with manual loading and a production speed of up to approx. 600 cans per hour. Technical data Capacity: approx. 600 cans/h Formats: 15 cl slim, 25 cl slim Dimensions: L.1480 mm x W.850 mm x H.1800 mm (max. 3000 mm) Weight: 350 kg Power: 0.8 kW Air consumption: 190 Nl/min Operating pressure: 6 bar, dry and non-lubricated air Voltage: 220 V (Single-phase) Frequency: 50 Hz Auxiliary voltage: 24 V DC Ambient temperature: 2 °C to 40 °C Fodpfx Ajym D R Eearjfw

Condition: used, Year of construction: 2016, Bottling line Alfatek | Beer Ffedpfxewdiq Te Aarew Year: 2016 Speed: 1,000 bph Direction: American Labeller Enos Nr.2 adhesive stations Filling Monoblock Alfatek 7.1 Elvira Filler 7 valves Capper single head crown cap 26mm and 29mm Safety protections

Condition: good (used), Automatic ROPP Capper Make: Bertolaso Fjdpfxsg Dvfwj Aarjfw Typ: Automatic ROPP (pilfer-proof) Capper Model: Alfa 110-VH40 speed: Up to 2.000 caps/hr Dimensions: L x W x H = 1.800 x 800 x 1.800 mm electric: 380 Volt – 50 Hz Tooling: Customer choice Features:Included cap sorting as-is or adjusted to customer needs

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. Ffsdpfx Aowrp Emjarsw The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: good (used), Used stainless steel pressure vessel// buffer tank Last use: food Item number: 10539 Volume: 1000 liters Type: Standing on 3 feet Ffsdjihptuopfx Aarjw Material (wetted): 1.4571 / AISI316 Max. Working pressure: +2 Bar Design: Single wall Dimension tank: Outer diameter: 900mm Cylindrical height: 1460mm Total width: 940mm Total length: 1040mm Total height: 2000mm Materials: Interior: 1.4571 / AISI316 Outer parts: 1.4301 / AISI 304 Facilities: Diameter outlet: 35mm Distance drain to floor: 50mm Outlet valve: disc tap nameplate: no Sight glass

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction Fsdpow Hr Awsfx Aarofw At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Year of construction: 2009, Model: Contiroll Year of construction: 2009 Speed: 18,000 BPH Counterclockwise directions Automatic head adjustment with program from panel 15 plates Mechanical cam plate movement 1 station Type of labelling of the stations: roll-fed Machine dimensions: 2000 mm x 2000 mm x 2500 mm (h) Safety protections Code: EA 650 Fedpfxewu Rf Hj Aarefw

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, A used briquette press C.F. Nielsen BP 5000 in very good condition Ffsdpfx Aaswiw Rxjrsw

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Ffsdeqvvpaopfx Aarjw

Condition: used, Year of construction: 2011, operating hours: 35,000 h, machine/vehicle number: LC581, Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview Ffjdpsyhbpzjfx Aarsw This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 250 ml Can end: 200 end (industry size 200) Monoblock configuration: filler–seamer integrated block for minimized DO pickup Formats & Throughput Primary can size: 250 ml Line speed: up to 14,000 cph (format- and product-dependent) Process Equipment Included Kaeser compressor package with booster and two air receivers (p.y. 2010, start 2011) CIP station, three tanks (p.y. 2011) Syrup room with cooling system (p.y. 2011) Nagema mixer (p.y. 1992) Five ready-to-drink tanks, 100 hl each, steel with food-grade lining Beverage filter (p.y. 2011) Frezart can depalletizer (p.y. 2009, start 2011) Two can washers adapted to 250 ml (p.y. 2011) Hermis tunnel pasteurizer (p.y. 2015) Stratec can fill level inspector (p.y. 2000) Victor can printer / coder (p.y. 2020) Kisters packaging machine (p.y. 1993) Keber palletizer (p.y. 1997) Sita pallet wrapper (p.y. 2011) Complete conveyor system interconnecting all machines + two can accumulation turntables (p.y. 2011) Thermo-shrink labeling line for blank cans (p.y. 2015) Advanced Automation & Control Systems In-line quality control: Stratec can fill-level inspection for continuous monitoring and reject of out-of-spec containers Product identification: Victor industrial can printer for date/lot coding CIP capability: three-tank CIP station supports hygienic cleaning cycles for filler and product pathways Integrated conveying and accumulation: conveyors with two turntables provide smooth flow and buffer management to protect uptime Detailed electrical and controls documentation is available on request. Production Line Integration Capabilities Upstream Depalletizing of empty cans (Frezart) and transfer to washing Dual can washers adapted for 250 ml format Syrup room with cooling, beverage filtration, and mixing (Nagema) for consistent syrup preparation Compressed air supply package (Kaeser) with booster and storage Filling & Seaming Isobaric filling with 45-valve Ortmann Herbst filler ensures stable carbonation retention Ferrum 706 can seamer with 6 heads for reliable double seam integrity on 200 ends Downstream Hermis tunnel pa...