ER-USP 5

ENGEL

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Crodpfe Afw Hyjx Aktei Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Crjdjzqbk Nopfx Aktoi

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Codo Afw Drepfx Aktjri Rated power of the pump motor: 45 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: good (used), Year of construction: 2014, clamping force: 7,000 kN, *ENGEL DUO 2550/700* *Clamping unit* • Clamping force: 7000 kN • Opening stroke: 1700 mm • Mold height: 450–1300 mm • Max. daylight: 2150 mm • Platen size: 1510 × 1440 mm • Distance between tie bars: 1100 × 960 mm • Max. mold weight: 11,000 kg • Ejector: 250 mm / 95 kN *Injection unit 2550* • Screw diameter: 80 mm • Screw stroke: 310 mm • Max. injection capacity: 1558 cm³ • Recommended shot size (1D–3D): approx. 402–1206 cm³ • Max. screw speed: 163 rpm • Injection rate: 441 cm³/s • Max. injection pressure: 1640 bar • Plasticizing capacity: 80 g/s (3-zone screw), 101 g/s (barrier screw) • Nozzle: 600 mm / 110 kN Crsdpfxo Ah R Rne Aktsi • Heating: 34 kW, 5 zones *Other* • Pump drive power: 55 kW • Oil capacity: 690 l • Weight: 21.5 t + 7 t Injection unit data per ENGEL catalogue for 80 mm screw and unit 2550.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of Hydraulic Cores (FS/MS): 1 fixed side and 2 moving side • Number of Hydraulic Cascades: 0 • Number of Hot Runner Control Points: 8 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes Credpfox Nr Rysx Aktsi • Robot interface: Euromap 67

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Csdpfxez Iptko Aktori Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Cjdpfx Aksz Ipn Ietsri Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Year of construction: 2024, The conveyor belt TYPE L is used to feed or remove products and waste of all kinds in vegetable processing and transportation. Credpsrckn Rofx Aktei ProdMa configures the conveyor belt according to the customer's requirements! The ALPHA 30 AA BLUE belt, equipped with guide rails and dividers, is ideal for transporting various foodstuffs and has been verified for the food industry.

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Codpfjz Ipqpox Aktori Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic operation Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-barless, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic operation Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the fixed platen Injection unit is wear-resistant and corrosion-resistant Codjz Ipr Tepfx Akteri Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic coolant regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Csdszhudkspfx Aktori

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Credpfoz Ipu Ujx Aktsi Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Codsz Ipvfspfx Akteri Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: new, Year of construction: 2026, Angled conveyor belt available in various lengths and widths, as well as different speeds. - Can be moved on steerable stop rollers. Crodpfolkdbysx Aktei - Angle is adjustable. - Cleat height: 30 mm. - Spring-assisted height adjustment.

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Crsdpjz Iqn Nsfx Aktji Additional equipment: Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request