Panel saw Felder K700 used

Felder G-KR107846R1

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! Hnedpfxjw A Hvdo Ab Ret You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: new, Year of construction: 2025, Working width: 408 mm Planer block: Strip knife Number of knives: 3 Planing table length: 1640 mm Planing stop angle adjustable: yes Folding up the planing tables: manual Maximum thickness throughput of the thicknesser: 225 mm Thicknessing table height adjustment: handwheel Planing thickness display: scale Feed speed: 7 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Hnsdpfx Aswfcqcob Rst Extraction connection: 100 mm Machine length: 1660 mm Machine width: 870 mm Weight: 260 g

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Hedpfx Absy D Rk Ie Rsnt Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Total power requirement 2,2 kw Hodpfx Abovz E Sis Rsnt

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Hsdpfx Aeu Agh Sob Rjnt Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Hnodpfeuhnwvox Ab Ret

Condition: used, Year of construction: 2023, operating hours: 950 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, tire size (rear): 710/70 R42, operating hours: 950, initial registration: 12/19/2024. Price: 199,000.00 euros net. Initial registration: 12/19/2024. Operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/HP (ISO 14396), max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, electronic engine control with Vistronic fan control, engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare radiator package, additional fuel pre-filter with water separator, 500-liter fuel tank. Hodpfsw E N Tdsx Ab Ront

Condition: ready for operation (used), functionality: fully functional, first registration: 06/2021, fuel type: gasoline, color: yellow, Year of construction: 2021, operating hours: 150 h, Equipment: all wheel drive, cable winch, Spider 2SGS large area mower and embankment mower with radio remote control incl. cable winch, bought in mid-2021, first owner, 150bh service recently new, operating instructions + all documentation included, remote control plus 2 times battery, I have only mowed with the mower in the solar park, nothing else. The mower runs great, no complaints. Hnjdpfx Abetv Rmfj Rst Just call if you have any questions

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2201925, overall weight: 2,263 kg, fuel type: diesel, tank capacity: 600 l, color: red, power: 112 kW (152.28 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 112 kW (152.28 HP), nominal power (apparent): 150 kVA, continuous power: 112 kW (152.28 HP), continuous power (apparent): 150 kVA, total length: 3,300 mm, total width: 1,200 mm, total height: 1,970 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: FPT/Iveco, type of cooling: water, fuel consumption (combined): 32.5 l/100km, fuel consumption (urban): 16.17 l/100km, fuel consumption (extra-urban): 22.77 l/100km, fuel: diesel, fuel tank capacity: 600 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 12 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,970 mm, control cabinet length: 3,330 mm, control cabinet width: 1,200 mm, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 140 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage-V. De efficiënte PFT/Iveco motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 600 liter heeft de generator een autonomie van maximaal 18 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. Technische Specificaties: - Model: Bredenoord 140 KVA - Nom. vermogen: 150 KVA - Max. vermogen: 150 KVA - Motor: FPT/Iveco NEF67TM3A - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 150 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 68 dB(A) op 7 meter - Brandstoftank: 600 liter - Autonomie: - 100% PRP: 18 uur - 70% PRP: 26 uur - Motorvermogen:112 KW Hnodpfx Abowfgd He Ret - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3.30 m x 1.20 m x 1.97 m - Gewicht: 2263 kg - Emissieklasse: Stage-V Brandstofverbruik: - 100% PRP: 32,5 L/h - 70% PRP: 22,77 L/h - 50% PRP: 16,17 L/h Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 140 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 600 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: new, Year of construction: 2026, CORMAK PT265 Planer Thicknesser The CORMAK PT265 planer thicknesser is a professional woodworking machine designed for intensive and precise processing of solid wood and wood-based materials. The new version of this machine features an innovative connected table system that significantly improves work efficiency and eliminates adjustment errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable solution for carpenters, craftsmen, and production workshops requiring accuracy, durability, and consistent machining results. Main advantages of the machine New connected table system – synchronized calibration of the infeed and outfeed tables eliminates setup errors and improves machining precision. Stable cast iron construction – the 170 kg machine weight minimizes vibration and increases operating safety. Powerful S6: 2.6 kW motor – provides smooth and efficient processing of hard wood species. Quick conversion from surface planer to thickness planer – fast mode switching reduces downtime. Three HSS knives – ensure precise cutting and excellent surface quality. 265 mm planing width – allows processing of wider workpieces. Design and technology The CORMAK PT265 is a modern woodworking planer thicknesser based on a reinforced construction with cast iron components. The working tables are ground and properly balanced to ensure repeatable accuracy and precision. The innovative connected table system enables synchronized height adjustment – once the table level is set, no further calibration is required when changing the planing thickness. Hnsdpovxhznefx Ab Ret The centrally positioned thickness planer table mounted on a guiding column ensures even material feeding without deviations. Rubber anti-vibration feet additionally reduce vibration, improving component durability and machining quality. Precision and working efficiency Thanks to the 2.6 kW (S6) motor, the machine provides high efficiency while maintaining stable operating parameters, even when processing hard wood species. The Ø75 mm cutter shaft with three knives and a speed of 4000 rpm guarantees a perfectly smooth surface finish. The precise graduated scale allows accurate adjustment of the table height. The aluminium tilting fence (700 × 150 mm), adjustable from 90° to 45°, enables precise material straightening at various angles. Standard equipment Cutter shaft with three HSS knives Aluminium fence 700 × 150 mm Graduated handwheel for table height adjustment Cutter shaft guard Built-in Ø100 mm dust extraction outlet Rubber anti-vibration feet Technical specifications Parameter Value Cutter shaft diameter 75 mm Cutter shaft speed 4000 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives 3 Shaft length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum surface planing width 265 mm Maximum thickness planing width 265 mm Maximum planing height 180 mm Maximum thickness planing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thickness planer feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Total motor power S6: 2.6 kW Power supply 400 V Operating manual (DTR) Included CE declaration Yes