Surface grinding machine

FLOTT BSM 75 A pol (NEU ab Werk)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Ledpofgyh Uofx Afioai Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Year of construction: 2025, Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle. Positive stops at 30° + 45° left and right hand Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut. Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder Environmentally-friendly micro spray lubrication system Chip box inside Saw blade drive with end of cut stop Precise saw blade carbide-roller guidance Laedpsbi S Disfx Afisi Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment Hydraulic lift up of saw frame Model Manual Miter 30° left Ø 130mm; square 120x120mm 45° left Ø 200mm; square 180x180mm 90° Ø 260mm; square 300x260mm 45° right Ø 200mm; square 180x180mm 30° right Ø 130mm; square 120x120mm Motor:[kW] 1,8 Saw blade: [mm]3350x27x0,9 Speed: 35/75 m/min Working heigt:[mm] 900

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe Laodpfjwtrz Hjx Afioi ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Number of drawers - 30 Size of panes - 2550 X 3210 for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track Ljdpfx Ash Uudvsfioai We export our products all over the world.

Condition: ready for operation (used), Technical characteristics En cours de vérification Laodpfxeuciqao Afisi Double roller carriage length: 3000 mm 5.5 kW motor 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM Scoring unit 0.75 kW Parallel fence with fine adjustments 1200 mm Tilting blade ⌀ 350 mm (max 450 mm) Automatic centralized lubrication for blade pivoting Cutting height : 100 mm (max 150 mm with 450 mm blade) Cutting height at 45° : 70 mm (max 106 mm with 450 mm blade) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7 Kw Motor: 7,5 CV Overall dimensions

Year of construction: 2022, condition: new, No. 04320 Lodjia N Nxspfx Afioai Edge grinding machine VOLPATO LVO 150 T New machine, 100% made in ITALY Year of construction 2022 Immediately available from stock Combined edge sanding machine with multiple work options. Independently motorized belt oscillation, mechanically adjustable up to a maximum stroke of 20 mm. The complete sanding unit can be swiveled up to 45° from the vertical, every angle in between is continuously adjustable. In the basic setting, designed as a 1-station solid sanding machine, it can be converted in a very short time for precise veneer sanding using the veneer edge sanding device included in the scope of delivery. Thanks to the 1-place solution, the machine can also be set up against a wall to save space. The basic equipment includes a 5-part set of grinding wheels (Ø 25-30-35-40-45-50 mm). By using different belt grains, you can achieve different surface finishes and degrees of wood removal. Belt dimensions 2640 mm Abrasive belt width 150 mm Working table 940x460 mm Sanding belt speed 15 m/s Belt drive motor 4 kW Motor for oscillation 0.15 kW Diameter driven roller Ø 75 mm Additional work table 350 x 300 mm Sanding rolls Ø 25 – 30 – 35 – 40 – 45 – 50 Swing stroke 15 mm Diameter dust hood Ø 100 mm Including operating instructions in English Including confirmation of compliance with CE standards Other scope of delivery as shown Terms of delivery: from stock Transport dimensions approx. 1650 x 1100 x 1350 mm LWH Weight approx. 250 kg Visitation on site possible by appointment Technical information, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale The manufacturer's warranty regulations apply to new machines

Condition: used, slot-milling length 300 mm groove width 34 mm flute depth mm cutting speed 6 m/min Lodpod Ih Uisfx Afioai return speed 6 mm/min clamping plate 380 x 300 mm weight of the machine ca. 285 kg dimensions of the machine ca. 590 x 1150 mm Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm - with normal bumper: 40 mm Electromagnetic Brake with various accesssories (see pictures)

Condition: as good as new (ex-display), Column drilling machine Make: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed 100 - 1.800 rpm. equipped as standard with: - 7" TFT - LCD display with touch function: Manual input spindle speed setpoint, Speed display actual value, Integrated drilling depth display with Touch zero point transfer, Virtual drilling depth scale in the display, Machine status displays and warnings in display, service information, Selectable operator language: DE/EN/FR/ES/IT/NL/RU. - Thread cutting device - Speed adjustment, stepless, by means of lever - Speed display, digital - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Clockwise and counterclockwise rotation via contactor control - spindle protection - Operating instructions Lasdpfx Afoiypz Eeiei other important technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - spindle cone MK 3 - 115 mm column diameter - 1,0 / 1,6 kW motor power - 515 x 360 mm Table dimension with the following options: - LED machine light - automatic spindle stop - technology calculator in display - workpiece counter

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo type/model: MS 75 x 2000 S Condition: new belt dimensions: 75 x 2000 mm belt speed: 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection: 100 mm motor output power S1 100%: 3,0 kW motor input power S6 40%: 4,0 kW Voltage: 400 V length: 1080 mm width: 440 mm height: 1000 mm Laodpfx Afjfnr Aisiei Weight approx.: 66 kg Features: Good grinding performance due to high belt speed Quick adjustment for horizontal and inclined position Continuous plane grinding surface for optimum grinding of long workpieces Constant belt tension due to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for cylindrical sanding Including quick tensioning system for fast belt change Easy adjustment of parallel belt run by means of adjusting screw Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Base frame

Condition: new, Year of construction: 2025, TTMC WELDING MANIPULATOR TYPE WP500 - Capacity horizontal 500 kg - Capacity vertical 250 kg - Table dimension 560 mm - Door stop 170 mm - Electric tiltable - Foot pedal - Documentation - 230V Lasdpfxogg Rb Ts Afioi CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE