Welding manipulator

TTMC WP500

Condition: new, - Horizontal capacity: 500 kg Ffedpfxjwin I Is Afnju - Vertical capacity: 250 kg - Table dimensions: 550 mm - Electrically tiltable - Foot pedal - Emergency stop - Documentation - 230 V

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Ffjdjg Tdpgjpfx Afnsu Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display very robust

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also Ffjdpfx Afofg E Hponeu “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting Fodpfxov Rbivo Afnsfu - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Fsdpfofibd Tjx Afnjfu Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m Ffjdpofg E Hlefx Afnsu ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Fedpforypmgsx Afnsfu Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Fsdpfx Aom Ew Stefnsfu dimensions: height tilted min: 800mm height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Year of construction: 2009, condition: reconditioned (used), 100t turning roll, rollerbed workpiece diameter 500mm-7.500mm speed 130-1.250mm/min Fsdpfx Ajmk Iktjfnsfu availible for renting

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Fodpfx Aol Dq U Usfnjfu Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified