Sliding table saw

Format4 Kappa 400 X-Motion

Condition: used, Year of construction: 2016, Sawblade tiltable 45 ° Length of the rolling table 3200 mm cutting width 1250 mm Second-hand machine Year of manufacture: 2016 Condition: very well maintained Features and technical specifications: Saw unit can be tilted up to 45° 3 speeds: 3,500/4,500/5,500 rpm Motor 7.3 kW S6 Cutting length 3,200 mm Cutting width 1,250 mm Max. cutting height 133 mm Electric height adjustment X-Motion on-screen control with 5.7-inch monitor Controlled rip fence Parallelogram safety guard, height-adjustable, Can be swivelled out of the working area, maximum saw blade diameter 400 mm Dust extraction connection 80 mm Scoring unit 1.1 kW, 8,500 rpm with 2-axis Hfsdozk N T Sepfx Af Aek Cutting stop with 2 digital jaws Tool compartment for 5 saw blades Degree grid index with length compensation for the extension table Parallel fence with digital display and automatic length compensation when the saw blade is tilted Saw blade, stop ruler length 1200 mm, can be swivelled out of the way Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen Hedpfx Ajv N D Ewsf Aofk - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, machine/vehicle number: 007135, Max. panel width: 800 mm Max. panel length: 2500 mm Panel return for edgebander: Left Hfsdet Hmppopfx Af Aek

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Hodpfewuuc Aex Af Aefk Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm Hedpfx Asw Dv Hzof Ajfk - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor - WoodWOP 6.1

Condition: good (used), Year of construction: 2019, Throughfeed CNC machine FELDER GROUP FORMAT4 CREATOR 950 (year 2019) with glue and dowel insertion, 12 kW HSK-F63 milling unit, integrated Ø 120 mm saw, dowel unit, and feed speeds up to 90 m/min represents a compact solution for precise milling, drilling, and panel sizing of wood. Key Technical Advantages - Occupies only 5 m² of space Ideal for workshops with limited space. - Easy clamping and programming Fast and intuitive operation, even for less experienced users. - Compact, powerful, and fast Perfect for smaller workshops seeking professional results. Advanced Features - Glue and dowel insertion unit - 12 kW milling unit (up to 24,000 rpm) - Automatic workpiece length measurement - Automatic tool changer (linear tool magazine with 4 positions) - Drilling from all five sides - Groove cutting with integrated saw blade Hfedpfewyvgajx Af Aok - Processing from all four sides of the workpiece - Door panel machining Drive Unit - Spindle: HSK F63 - Number of axes: 3 Travel Distances - X-axis travel: 3000 mm - Y-axis travel: 950 mm - Z-axis travel: 80 mm Tools - Maximum tool weight: 7.5 kg Worktable - Table load capacity: 130 kg Additional Equipment - Online remote service support package - Automatic central lubrication PRICE EXCLUDES VAT.

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Hfodpswcyacefx Af Ajk Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Hsdpexwaz Hefx Af Aefk

Condition: used, machine/vehicle number: 008210, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 10000 mm Hedpfx Aox A Thwsf Ajfk Panel return for edgebander: Right

Condition: good (used), Code: 0461 Brand: ALTENDORF Model: F 45 III - CE Standard Hfsdpfxjzp Dx Ho Af Ask CNC-controlled 3-axis panel saw with tilting blade for furniture, custom-made furnishings, panels, doors, wooden window frames, plastics, composite materials and various - CE Standard Technical data: Precise sliding double roller carriage Aluminium carriage length 3200 mm Max blade diameter 450 mm - (without scoring unit mm 550 ) Max cutting height 150 mm - (without scoring unit height mm 200) Cutting height at 45° 105 mm - (without scoring unit height mm 141) Scoring unit blade diameter 120 mm 3 controlled axis (lifting/blade tilting/parallel guide) Electric motor adjustment 2-axis scoring unit Control panel at operator height with colour LCD screen Anodised aluminium table extension 840 mm Parallelogram blade guard Register for oblique square cuts, manual adjustment, with length compensation, end cutting up to 3500 mm Blade locking system Work table height 910 mm Motor power Hp 7,5 USB Port Diagnostics Overall dimensions of assembled machine mm 3400 x 3600 x 1800 h Overall dimensions for transport mm 3400 x 2100 x 1800 h Weight kg 1050