Hot foil stamping machine

Gietz FSA 790

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, cutting width (max.): 560 mm, cutting length (max.): 790 mm, overall weight: 7,000 kg, working width: 560 mm, We offer this refurbished Gietz FSA 790 machine, type: paper cutting machine, year of manufacture: 1989. Manufacturer: Gietz Model: FSA 790 Year of manufacture: 1989 Condition: refurbished Machine type: paper cutting machine If you have any questions or require additional information, please contact us by message or phone. Max sheet size: 790 x 560 mm Temperature control: up to 200° C Itedpfx Absygkxcjgof Max pressure: 150 tons Speed: 5,500 cycles/hour Power consumption: 7.3 kW Heating power: 9.5 kW Weight: 7,000 kg 3x electronic longitudinal foil feed control Works with foil on 1’ cores Capability for both longitudinal and cross foil feed relative to sheet travel 6 heating zones 3 transverse drives 3 longitudinal drives 2 die mounting plates – honeycomb type High-speed suction feeder Machine is in excellent condition, fully overhauled. The electrical cabinet has been modernised to current standards and fitted with the latest control system (automatic contactors). Die-cutter mounting frame included.

Year of construction: 1988, condition: good (used), machine/vehicle number: 11801, Gietz FSA 720 Foil/stamping embossing press. size 720x520 mm, minimum sheet size 297x210, Double sheet detection, pressure 120 t, max speed 5000 sheets/h, pile height 950 mm with max 700kg, pile height on delivery 700mm, dimensions of the machine 380x280x195 cm Machine no: 11801 Iedpfxjwnqrgj Abgetf

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr Top EFF specification High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery Itedpfx Abjx Ezkujgef

Condition: ready for operation (used), Year of construction: 1997, 8-Farb-Bogen-Offset 8-col.sheet-fed offset presses Built in 1997 Size max 520 x 740 mm min 210 x 280 mm Image area max 510 x 740 mm Speed max 15.000 c/h Itodpeygwbdsfx Abgsf Pile height feeder 945 mm Pile height delivery 1.000 mm

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Itsdpfx Aoynuudebgef

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Itsdpfxoxz Ewns Abgof

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Itodpfjw Tc R Rsx Abgof

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Itodpfxetq Ha To Abgof

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Iodpfx Aoxz D Ncobgstf Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Machine weight: ~2.5 – 3 tons

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Iodpfx Absiklxbjgetf We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.