GM Gera ARCADE GEL 6 RV1-VL 362/110-30 Bottle Washer (2010)

GM Gera Flaschenreinigungsmaschine

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Ijdpfxowg E D Ij Abgjar

Condition: excellent (used), pressure: 210 bar, Gaulin, Homogenizer model MC18 3TPSX. Iedpfxswf Itcj Abgsar stainless steel clad, 2 stage hydraulic valve assembly, 54mm pistons, Tungsten Carbide coated. aseptic cylinder block, puppet valves.. Remote controlled homogenization pressure adjustment and read-out. Capacity 6000 l/h, 210 bar Maintenance history available. Spare parts available. Excellent working condition

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Iaedpfx Abjl Hx Adsger

Condition: like new (used), Year of construction: 2020, functionality: fully functional, STALAM RF 20 KW ID.NO. 2795 Stalam mod RF 20 KW microwave oven for frozen meat/fish products. Thaws the product effectively from the core outwards in a few minutes. Year mod 2020 the machine is in like new condition! Band width 140 cm. It is also possible to fry products such as bacon etc. with the machine. Dimensions 570 x 200 cm Height 340 cm. Isdpfjucv Huex Abgsar

Year of construction: 2025, condition: new, Automated pallet dispenser is the backbone of your automation processes. Loaded with up to 10 euro pallets (1200x800 or 1200x1200), it removes the need to prepare each pallet manually, saving time and reducing strain on employees. Instead, the unit dispenses pallets with a push of a button, or a pre-set algorithm onto a motorised roller conveyor, which transports them for further processing. PD-10 can be used in line with various palletising solutions. Iajdpfxehbg Uxe Abgor Fits up to 10 euro pallets Loaded up with a forklift Reduces physical strain Increases efficiency

Condition: used, D-6886-Delford Type SP 800 Iasdpsc Nlxpjfx Abgsr Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating Iaedpeud N Hdofx Abgjr  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Isdpfx Ajv D A Imobgsar Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. Iaedoicbbzspfx Abgjr The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: used, operating hours: 35,000 h, machine/vehicle number: LC581, Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 250 ml Can end: 200 end (industry size 200) Monoblock configuration: filler–seamer integrated block for minimized DO pickup Formats & Throughput Primary can size: 250 ml Line speed: up to 14,000 cph (format- and product-dependent) Process Equipment Included Kaeser compressor package with booster and two air receivers (p.y. 2010, start 2011) CIP station, three tanks (p.y. 2011) Syrup room with cooling system (p.y. 2011) Nagema mixer (p.y. 1992) Five ready-to-drink tanks, 100 hl each, steel with food-grade lining Beverage filter (p.y. 2011) Frezart can depalletizer (p.y. 2009, start 2011) Two can washers adapted to 250 ml (p.y. 2011) Hermis tunnel pasteurizer (p.y. 2015) Stratec can fill level inspector (p.y. 2000) Victor can printer / coder (p.y. 2020) Kisters packaging machine (p.y. 1993) Keber palletizer (p.y. 1997) Sita pallet wrapper (p.y. 2011) Complete conveyor system interconnecting all machines + two can accumulation turntables (p.y. 2011) Thermo-shrink labeling line for blank cans (p.y. 2015) Advanced Automation & Control Systems In-line quality control: Stratec can fill-level inspection for continuous monitoring and reject of out-of-spec containers Product identification: Victor industrial can printer for date/lot coding CIP capability: three-tank CIP station supports hygienic cleaning cycles for filler and product pathways Integrated conveying and accumulation: conveyors with two turntables provide smooth flow and buffer management to protect uptime Detailed electrical and controls documentation is available on request. Production Line Integration Capabilities Upstream Depalletizing of empty cans (Frezart) and transfer to washing Dual can washers adapted for 250 ml format Syrup room with cooling, beverage filtration, and mixing (Nagema) for consistent syrup preparation Isdjyhbpzepfx Abgoar Compressed air supply package (Kaeser) with booster and storage Filling & Seaming Isobaric filling with 45-valve Ortmann Herbst filler ensures stable carbonation retention Ferrum 706 can seamer with 6 heads for reliable double seam integrity on 200 ends Downstream Hermis tunnel pa...