Multi-finger joint assembly line

GRECON Compact

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Rodpfx Asihpn Neg Iop Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display Rodpfxsiwaxns Ag Iop (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers Rsdpscggy Sefx Ag Isp - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Heat exchanger: Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Condition: Equipped with Jenbacher DIA.NE control and monitoring system Fully serviced in line with OEM schedules by an official service centre Redpfxjxb D Hbs Ag Iep Excellent working condition 📍 Location: England

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Rjdpfx Agow Sy T Ho Isp

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately. Rodpfx Agjwclkye Ijp

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Rsdjv Hwk Uspfx Ag Iep Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Redpfx Agstk N Dkj Ijp

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Redpsw A A Ebefx Ag Iep

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head Rjdpfxotuyr Ij Ag Iep 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR