Bench milling machine

SCM T150

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical specifications: - Spindle clamping length: 180 mm - Spindle tilt: -10° to +45° - Motorized spindle stroke with fine adjustment - Motorized spindle tilt - Motor: 5.5 kW - Table size: 1200 x 730 mm Hnodpoxwz Rcjfx Ad Dsw - Largest table opening: 420 mm - Motor brake - Speeds: 3000/4500/6000/7000/10000 rpm - Speed display - Extraction port: 125 mm - With Aigner integral fence - With 3-roller power feed Availability: approx. mid/end of January 2026 Location: Hesse

Condition: as good as new (ex-display), Year of construction: 2014, Exhibition machine Year of manufacture 2014 Cutting length 2600 mm Cutting width 1270 mm Cutting height at 90° = 130 mm Height adjustment electromotive saw blade diameter 400 mm swivel adjustment 0 - 45° electromotive motor 7 kW speeds 3000/4000/5000 rpm Control: display with separate keyboard swiveling control panel at eye level USB interface 300 programming memory locations electronic position display at the parallel fence cross section frame with parallelogram -manual adjustment -angle adjustment +50 -50° with digital display -length and angle measurement automatic star-delta switch Original price 25950.- Hnjdpfekwha Esx Ad Dsw Availability: short term Location: Switzerland

Condition: used, Motor 6 / 7.5 kW Hnodpjw Enw Iofx Ad Dew Location: Nattheim

Condition: excellent (used), Year of construction: 1997, Further information will follow… Hnedpfx Adexuwqte Dew

Year of construction: 1975, condition: excellent (used), Dimeter of the drum: 525 mm Depth of the drum: 620 mm Hnedpfx Adsfgd S Nj Djw Volume: 170 Ltr. Capacity: max. 150 Kg. *with Time-controller 0-60 min*

Condition: ready for operation (used), Technical characteristics Digital adjustment of shaft height and speed Spindle height and motorized fence HSK F80 tilting spindle Tilting -10° / +45 5.5kW motor Speed 3000, 4500, 6000, 7000 and 10000 rpm Hjdpfstvcz Asx Ad Djnw Shaft diameter: 50 mm Shaft length: 180 mm Maximum tool diameter : 320 mm Quick tool change (hydraulic) Table dimensions : 1200 x 730 mm Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 1400 mm Width: 1150 mm Height: 1100 mm Weight: 900 Kg

Condition: excellent (used), 2 spindles 30/40 mm Motor 5.5 kW Table length 250 cm Width 37/100 cm Hnodpfxowq Du He Ad Dew Upper and lower table as well as electric angle adjustment

Condition: new, Year of construction: 2025, functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Hsdpfx Adeu Nz Nds Donw Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German

Condition: used, Year of construction: 2003, functionality: fully functional, Work table dimensions 1,200 x 730 mm Spindle tilt -10 + 45 Max. clamping height on spindle 140 mm Max. tool diameter tool diameter 250 mm Max. diameter for tool lowering under table 300 x 130 mm Spindle speed 3300/4400/5600/7500/10000 rpm. Extraction nozzle on fence and rear stand, diam. 120 mm Hjdevurhdopfx Ad Donw Pneumatic working pressure, min. 6 bar Main engine 7.5 HP, 5.5 kW For further information about technical data. Contact us

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. Hnedpfxoq Auhds Ad Dew - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm