Folding machine

GUK FA36/4

Condition: good (used), Year of construction: 2005, machine/vehicle number: 49664, Folding machine GUK FA 36/4 AS, machine number 49664, year of manufacture 2005, 4 pockets, speed controller, friction feeder, noise reduction cover, counter, delivery unit, in good condition, immediately available. If you are interested, we can also provide information on other machines in our inventory. Isbr Sfsu Tqfyezb Rjig You are warmly invited to inspect the machine at our premises by prior appointment. Dkedpexby Hqofx Affjk

Condition: good (used), Year of construction: 1998, Digital Programs Dksdsycfxpopfx Affsk Serial Number: 68H1526

Condition: excellent (used), Year of construction: 2004, GUK Folding Machine FA 45/6 FL2-45 - with 6 folding pockets - high-pile feeder - with counter - Max. paper size 460 x 650 mm - Min. paper size 85x100 mm (60x100 mm – special option) - Minimum fold 18 mm (on first pocket 26 mm) - Output capacity 10–30,000 depending on material - 6 folding pockets, 450 mm feed width - with noise protection - steel-rubber rollers - special accessories: window folding pockets - Rollers and belts in good condition - Location: Germany - Available – immediately Dkedpfx Aevr Iq Asffsk Well-maintained machine Machine is technically and visually in very good condition

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Dsdpfxew Tc R Rs Affokk

Condition: used, - air suction collator VAC-100a Horizon VAC-100a air-suction collators - technology: touch & work - model: air-suction collator - bins: 10 each collator Dsdpfsv Haaljx Affekk - error avoidance: misfeed-,doublefeed- and jamming control - saveable jobs: 9 memories for repeat orders - extensibility: up to 6 collators (60 bins) programs: - doublecycle (nonstop-work) - inject (simply and doubly) - booklet making program - block program - selective collating - sheet size: max. 500x350mm; min. 148x120mm - paper weight: 40-250g/qm - loading height: 55mm/ bin - production speed: max. 9.500 cycles/h Bwjbklicou Sr Amjkrek - power: 230V/50Hz - 1,86kW - dimensions: 842x652x1.961mm - weight: 310kg includes Stacker Format: 500 x 350 mm Equipment: Horizon Stacker Receiving Tray with Right-Side Delivery, ST-20R air suction collator VAC-100a Technology: touch & work model: air-suction collator bins: 10 each collator error avoidance: misfeed-,doublefeed- and jamming control saveable jobs: 9 memories for repeat orders extensibility: up to 6 collators (60 bins) stack opportunities: flat or laterally shift

Condition: good (used), Schmedt - PräRund - PräDeck - PräKant, in a good condition, immediately available Dedpfxjh Dy Ive Affokk

Condition: excellent (used), Like brand new machine for soft and hard cover books! Both PUR and EVA capability! Sold as a packet with Casematic H46Pro Production speed: 1–3 books per minute Min/max binding thickness: 0.1–45 mm Dksdpfx Asvnzx Ejffsk Max. binding length Up to 455 mm Min/Max. binding heigh: 140 mm / 320 mm Max soft cover thickness: Up to 400 g/m2 Voltage (V) / Frequency (Hz) 220–240 / 50–60 Max. current: 3.8 A Machine dimensions (W x L x H): 107 x 60 x 64 cm Weight: 90 kg Standard tools Hard & Soft cover tool set

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Dkjdpsx U A D Usfx Affek Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: used, Year of construction: 2016, Year: 2016 Condition: refurbished - very good condition - new steel roller + heating - new pressure roller with Teflon treatment Dksdpexvbgnjfx Affjk - new bearings on main rollers - refurbished extraction and separation rollers - new suction cups - new perforation and deflection wheel Configuration - automatic loading - suction loading head - automatic separation - unloader - Jogger Technical specifications: - maximum lamination speed - 20 m / min. - sheet loading - automatic - loading system - Heidelberg suction loader - loading table capacity - 54 cm - sheet overlap regulation - automatic PLC controlled - overlap accuracy - + / - 2 mm - separation of laminated sheets - automatic, by cycling rollers - paper thickness - 115 - 500 gsm - main roller pressure - pneumatic - external compressor - 150 l / min, 6-8 bar - min. sheet size (w x d) - 20x 30 cm - max. sheet size (w x d) - 53 x 74 cm - max. output - 1650 B2 / hour - roller heating time - 8 min - temperature control - 80 - 140°C -

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m Dodpfx Ajwh Tq Ssffskk • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.