Material separators Höcker Polytechnik PMA-U 160/19/3.00 2006

Höcker Polytechnik PMA-U 160/19/3.00

Condition: used, Year of construction: 2022, fuel type: diesel, motor manufacturer: C32 (Remanufactured by Cat), Field of application: Construction Empty weight: 18.221 kg Generator capacity: 1.250 kVA Frequency: 50 Voltage: 230 Transport dimensions (LxWxH): 20 ft HC container Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately. Hnodpfx Aswgvqfebroh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - Hnedpfjww E Nrex Abrsh System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Year of construction: 1987, condition: good (used), functionality: fully functional, Asitrade Singlefacer Hnedotxlv Hspfx Abrjh E-Flute and B-Flute Year: 1987 - completely overhauled in 2019 Unwinder: 6-stations Max. working width: 1410 mm Max. speed: 150 m/min Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Hnodpfx Aexzr Hpebreh Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Hedpfxsxd U Sas Abrenh Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Hsdpovphiyefx Abrenh Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Hjdpfxjv Ipl Te Abrenh

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, Equipment: CE marking, type plate available, Heidelberg Diana 90 AUTOSET – Refurbished Folder Gluer / Folding Carton Gluing Machine ✅ Condition: Fully refurbished in 2024 (complete mechanical and electrical overhaul, new motors, shafts, rollers, and control electronics) ✅ Functions: Straight-line, crash-lock bottom, 4-corner box gluing ✅ Speed: up to 500 m/min ✅ Formats: Diana 45 → 48–570 mm | Diana 90 → 48–900 mm ✅ Automation: Motorized carriers, AUTOSET feature, touchscreen operation ⚙️ Advanced Features - Precision aligning module for perfect folding - Feeder and transfer sections equipped with independent drive motors - Pneumatically lifted feeder top for easy access - LPS Clamping System for rapid module setup - Glue system with LPS GP AUTO (maintains glue freshness during stops) - Drive system: IE3 motors, ABB frequency inverters, Siemens PLC control - Final fold station design inspired by Bobst Alpina 🚀 Why choose LPS Diana? ✔️ High efficiency – quick job changeovers with Autoset ✔️ Versatile – accommodates a wide range of carton types ✔️ Premium build – robust frame for stability and vibration-free operation Hodpfx Ajvy Efyjbrsnh ✔️ Remote diagnostics and service capability 🏭 Additional Machines Available from Stock We are a company specializing in full mechanical and electrical refurbishment of folder gluers (Heidelberg Diana, Bobst Alpina). We deliver machines with new modules, including our proprietary semi pick-up delivery table system. Currently available refurbished folder gluers, nearly ready for delivery: - Diana 90 Crashlock 4/6 Corner – €120,000 - Diana 90 – €100,000 - Diana 45 – €100,000 👉 All machines are fully rebuilt and include: - New shafts and bearings - New electrical cabinets with ABB and Siemens components - Comprehensive mechanical and electrical overhaul Prices are negotiable depending on configuration and customer requirements.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Hsdpfxet E Nthj Abrenh Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Hnjdsiklxbspfx Abrjh Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.