Vertical machining center

HAAS DM-2

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Cgodjx D Dzwspfx Anwst Milling

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC HAAS VF-2SS 2011 2 units CNC HAAS VF-2SS Cedpfoyh Rwxjx Anwegt 2011 Fully functional

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Codpfxjydil Ne Anwsgt Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1140165, functionality: fully functional, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 Cgjdpjwqcqtjfx Anwst Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further details according to manufacturer - without guarantee Travels X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table size: 864 x 381 mm T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,934 h, travel distance X-axis: 406 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 254 mm, controller manufacturer: HAAS, spindle speed (max.): 40,000 rpm, number of axes: 3, This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details. Cgedpfx Aneyhfltewet • Spindle: • IBAG Switzerland spindle • Water-cooled • Tool holder: HSK E32 • Tool changer: • Type: Automatic Tool Changer (ATC) • Capacity: 18 tools • Working hours (from control): • Servo time: 9,158 h • Motion time: 4,984 h • Spindle time: 5,934 h • Idle time: 0:44 h • Electrical data: • Voltage: 360–480 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 20 A • Largest load: 35 A • Short-circuit interrupting capacity: 10,000 A Technical Specification Taper Size HSK 32

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 Cjdpfew Intasx Anwsgt --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: as good as new (ex-display), Various designs such as round, hexagonal or square and in smooth Cgjdpfxoh Dmamj Anwjt smooth version, cross-grooved version or with longitudinal and transverse grooves. A current list of available new and as-new SK32/SK42/SK52/SK65/SK80/SK100 expansion chucks can be found on our homepage. We look forward to your inquiry. STALEX Machine Tools GmbH

Year of construction: 2012, condition: excellent (used), *PROMOTIONAL PRICE!!! Machine has Japanese Kitagawa rotary tilting table Fanuc 0I-MD control system BT30 spindle Cgedpsi Dbc Uefx Anwjt 12 tool capacity We have 2 sets in our stock.

Condition: good (used), turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min Csdpfeyz Dg Rjx Anwsgt total power requirement 1,4 kW dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. Csdpfsylw Stex Anwegt • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40