Vertical machining center

HAAS TM-2P

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,995 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar • Air consumption: 113 l/min Lsdpfx Akezcnzmjqehn • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40

Year of construction: 2007, condition: ready for operation (used), Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Lsdpfx Akjy Hvp Isqjhn

Condition: like new (used), Year of construction: 2023, Haas TM2-P Lsdpjzua Hwjfx Akqjhn Year: 2023 X-1016, Y-406, Z-406 RPM: 6,000 BT 40 WIPS HSM 4th axis connection Very few operating hours Like new!

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 Lhsdpfx Asyalpcjkqsn • Coolant tank: 300 l

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Lhjdpfexfka Nox Akqon Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min Lhsdpfx Aksxx A Ewsqen rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 11,700 h, power: 8.9 kW (12.10 HP), travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 27,000 rpm, The machine is used for fine machining of small pieces. (Al, steel) Lodpfx Ajq N Ayfokqjhn

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,950 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: HAAS, controller model: CNC Control, workpiece weight (max.): 680 kg, total height: 2,570 mm, total length: 2,570 mm, total width: 2,510 mm, table width: 356 mm, table length: 914 mm, table load: 680 kg, overall weight: 3,600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,950 h, spindle nose: CAT 40 / BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The Haas VF-2SS is a compact, high-speed 3-axis vertical CNC machining center. The “SS” stands for Super-Speed. This machine is installed and operational at our location and can be inspected while running! Lhsdoz Nhphopfx Akqon This HAAS VF-2 SS is equipped with: - SS (Super Speed) version. - 24-tool magazine. - Internal cooling (IKZ). - Chip conveyor. - Renishaw OTS tool probe. - Renishaw OMP40-2 3D probe. - Programmable coolant nozzle. - Air blow gun. - Coolant tank. - Original documentation.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, Lhsdpfx Ajzg Efijkqen 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Max. turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Ljdoyx U Itspfx Akqshn Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €29,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €36,500 excluding VAT This machine is available for inspection in Genk and can be powered on for demonstration!