Tube end notching machine

HAHNDORF

Condition: used, Year of construction: 1985, 32 mm 12 mm stroke 330 mm pulling capacity 3,0 t Gsdpfx Ajwkvthol Usbu total power requirement 1,2 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Good condition.

Condition: good (used), Drill with coordinate table and sliding head Brand: IBARMIA Model: B70P Capacity: Up to 70mm drill Characteristic: - Transmission: By gears. - Coordinate table with 2 X-Y axes. - Automatic advance. - Number of automatic advances: 6 - Number of speeds: 24 - Chap. max. drilling capacity in 70Kg steel: 70mm - Chap. max. drilling capacity in 200Hb cast iron: 80mm - Electromagnetic clutch - Automatic tool ejector - Motorized moving head - Bidirectional rotation. - Head travel: 1500mm - ANILAM digital X,Y coordinate display. - Table tours: X570 x 260mm - Table dimensions: 500x1000mm Godpfx Aleh Rydno Uobu - Manual oiler Cooling system using coolant. It is delivered revised and with the protections for CE compliance.

Condition: used, Year of construction: 1990, weight of the machine ca. 350 kg Gedpfx Aezxiabsl Ujbu

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t Gedpfxov I Sxvs Al Uobu - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: ready for operation (used), Fully hydraulic automatic circular saw for workshop and production. The material is clamped by a hydraulic vices. The control offers simple machine operation. The length can be adjusted via a vernier with 0.1 mm resolution. The piece count adjustment The piece count is set by a piece count counter which switches off the machine when the piece count is reached. Gbjdpjiuz Smefx Al Ueu The material feed is carried out via a hydraulic cylinder and ensures the highest cutting accuracy. If you have any questions or need a different cutting range, just give us a call. We would be pleased to show and demonstrate the machines to you. Technical data: Bandsaws KASTO Machine type GKS AU Technical data: Drive power Drive power saw gear. 1,6/2,5 KW Cutting speed 14/28 m/min Cutting range round: 140 mm Cutting range flat: 160x90 mm Saw feed hydraulics Hydraulic Saw blade dimension 425 mm Hydraulic material feed 600 mm Material support. 1050 mm Machine dimensions Length/width 2575x2700 mm Height 1900 mm Weight of the machine 1350 kg Year of manufacture 1987

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant Gjdpfx Ajv Hhrvsl Uebu

Condition: refurbished (used), ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece. Gjdpfx Aleyzt T Tj Uebu The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material. Power (Ton): 30 Number of rollers: 2 PLC: YES

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Gedjyml Ekspfx Al Uobu Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 Godpjzb Imaofx Al Ujbu €8,500, as is

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: Gedpfxjxx Nuxo Al Usbu WORKING