Profile steel shears + notching device

PEDDINGHAUS Peddimax 1002

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Kdedpfx Acorfx Uts Ejr Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine Kdsdev Tpxqjpfx Ac Ejr -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears Kdsdpjmidyiofx Ac Esr - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,400 mm, power: 41 kW (55.74 HP), motor manufacturer: Toyota (1ZS), gearing type: automatic, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 45 mm, tire condition: 100 %, front tire size: 7.00-12, rear tire size: 6.00-9, overall weight: 4,040 kg, color: orange, Equipment: CE marking, full service history, head guard, lighting, pallet forks, sideshift, === MAIN SPECIFICATIONS === Year of manufacture: 2023 Operating hours: 0 h (new) Max. lifting capacity: 2500 kg Max. lift height: 5.0 m (5000 mm) Mast type: Triplex (FSV – Full Free Lift) Free lift: Yes (Full free lift) Fork length: 1000 mm Sideshift fork carriage: Yes (Integrated sideshift, IIA class) Drive: Diesel Transmission: Automatic (Torque converter) Cabin: Open (Overhead guard) Tyres: Solid (SE – Super Elastic) Front tyres: 7.00-12 Rear tyres: 6.00-9 Engine manufacturer: Toyota 1ZS (3-cylinder diesel) Engine power: 41 kW Emission class: Stage IIIA Weight: approx. 4040 kg (with 5m mast) CE certification: Yes === HIGHLIGHTS === Triplex mast with full free lift (ideal for indoor use with low ceilings) Integrated sideshift with 3rd hydraulic function Heavy-duty 2.5-ton capacity Solid SE tyres for industrial applications Toyota SAS (System of Active Stability) === CONDITION === Brand new machine – unused. Fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Kjdpfsynli Sjx Ac Ejdr Price on request (EXW / excl. VAT). Reliable 2.5-ton diesel forklift equipped with a 5.0 meter Triplex (FSV) mast and full free lift, making it ideal for warehouse operations with limited ceiling height. Powered by the durable Toyota 1ZS diesel engine (41 kW), this model delivers strong performance, high efficiency and long-term reliability. With a rated capacity of 2500 kg at 500 mm load centre and integrated sideshift, the Toyota 52-8FDF25 is perfectly suited for logistics, construction and industrial material handling. Equipped with solid SE tyres and Toyota’s SAS safety system for maximum operational stability and safety. Fully inspected, CE certified and ready for immediate deployment. Spare parts and professional support available upon request. === DELIVERY === Crane loading available upon request. Flexible worldwide shipping options available. Transport professionally handled by Collé Rental & Sales.

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Kdodjx H Rmuopfx Ac Eer Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm Kdodpfx Aera Rrhsc Ejr table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 16 mm, cutting length (max.): 4,000 mm, HYDRAULIC SHEAR LVD MVSB 40/16 Serial number 24159 Yom 1997 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 4050 mm Distance between uprights 4250 mm Range back gauge 1000mm Min. cutting angle 0.5 ° Max. cutting angle 2.0 ° Min. number of strokes/min. 7 Max. number of strokes/min 26 Min. blade clearance 0.5 mm Max. blade clearance 1.6 mm Motor power 22 kW Approx weight 20500 Kg LxWxH 4800x2170x2750mm Accessories included; Electrical adjustment of back gauge 1000mm with Go-to controller blade clearance and cutting angle adjustable. 1 x Front support 1500mm, one with 90° square arm front support 1 x Front support of 1500mm Foot pedal Kedpfx Asuipu Ejc Eedr

Condition: good (used), Code: 0136 Brand: ITALPRESSE Kdjdpfepbvqvox Ac Eer Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: refurbished (used), Year of construction: 1996, machine/vehicle number: 02/510/004, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, stroke length: 265 mm, table height: 800 mm, total length: 2,670 mm, total width: 4,100 mm, total height: 2,800 mm, overall weight: 22,000 kg, travel distance X-axis: 500 mm, controller manufacturer: Cybelec, controller model: Visitouch 19" 2D, working width: 4,100 mm, bending force (max.): 225 t, back gauge speed R-axis: 100 mm/s, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, Pressbrake fully updated with a new numerical control 2D from Cybelec Switzerland Kdodpfxjw I A Nce Ac Eor

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Kdjdpfxsu Icmhj Ac Ejr Operation by foot switch Some accessories available. Please ask. *