Hydraulic pump with gasoline engine

Hawe R60B

Condition: used, Year of construction: 2019, Equipment: compressed air brake, Heatable front and rear windshield Additional device holder / Cgedjr Ilxvspfx Ab Uor

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, fuel type: diesel, tank capacity: 34 l, color: black, output current: 65 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 12 kW (16.32 HP), continuous power: 10 kW (13.60 HP), total length: 930 mm, total width: 660 mm, total height: 900 mm, rotational speed (max.): 3,000 rpm, type of cooling: water, Proton 12000 230V Oasis gensets work well wherever peace and quiet are valued. This is a genset for demanding conditions of use. In addition to silence and high power, the genset is water-cooled which ensures round-the-clock operation. ABBREVIATION: Genset type: Single-phase Fuel type: Diesel Liquid-cooled: Yes Voltage: 230 V Rated power: 230V - 10,000 watts (12.5kVA) Maximum power up to 15 minutes - 12,000 watts (15 kVA) WEIGHT: Gross weight: 330kg FUELING: 2.2 liters per hour (at 70% of maximum power) 1.8 liters per hour (at 40% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 2V8-W Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 2 Direct injection - Yes Type of cooling - Liquid (The unit has a radiator) Displacement - 998 cc3 Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 24 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure sensor - Yes Oil condition sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 1100W Oil sump capacity - 2.5l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 220-CAVR-D Rated current (230V) - 65 A Voltage - 230V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Enclosed - Silenced Ability to discharge exhaust fumes outside the facility - Yes Sound pressure level LPA - 73dB (measurement - 5m, open space) Fuel tank capacity - 34 liters Operating time on a full tank (Average) - 12 hours SOCKETS: Number of three-phase outlets - none Number of single-phase outlets - 1 piece (32A), 1 piece (16A) Number of other outlets - none DIMENSIONS: Diameter of wheels - 10 cm Width - 66 cm Length - 93 cm Height - 90 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - No Starting type - Electric Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 1xC39 (for 230V) Hour meter - Yes Battery - 45 Ah TRANSPORT KIT: Yes - Small wheels Yes - Handrails on two sides Yes - Swivel wheels Yes - Wheels with mechanical lock RICH EQUIPMENT See below what else the kit includes: - Battery - Air filter - Oil filter - Fuel filter - Keys for current service - Plugs Why our company? Cgedpfx Abotqffco Uer We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2026, Yanigav Log Splitter FB9 / FB9G Cgodpfjr D Ng Eex Ab Uer • Weight: 360 kg / 440 kg • Dimensions (L x W x H): 1.0 x 1.0 x 2.7 meters • Power: 15 t / 19 t • Motor: Hub drive PTO / Hub drive PTO • Log length: 50-110 cm • Log diameter: 30-70 cm • Wedge length: 30 cm Price: €3,100 / €4,100

Condition: like new (used), “Hazemag Universa 1620” for Sale Manufacturer: Hazemag Type: Universa 1620 Rotor size: 1.600 x 2.000 mm Cgodpfxoggflvo Ab Ujr Inlet size: 2.500 x 2.000 mm

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Cedpfx Aew Uf Ihjb Usgr Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Cgodpfx Aouhnwvjb Usr

Condition: new, Cutting capacity round 0°: 127 mm Cutting capacity flat 0°: 125 x 130 mm Cutting capacity round 45° right: 90 mm Cutting capacity square 45° right: 90 x 90 mm Cutting capacity round 60° right: 45 mm Cutting capacity square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor output: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw bow swivels up to 60° - Ideal for cutting tubes, profiles, and solid material made of stainless steel, iron, etc. - Sturdy saw arm for low-vibration operation - Low-noise due to robust construction - Automatic shut-off after cutting cycle via microswitch - Quick-release vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Environmentally friendly—no need for lubricants or coolants - Lightweight design makes it ideal for use on construction sites - Base frame available as an optional extra (not included in delivery) Codpfxsilk Eke Ab Uogr Includes: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available for an additional charge: 129 Euro (net, special price)

Condition: like new (used), Multistage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product no.: A45937986 Cgjdpfx Aofz D Dneb Uor Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection Cgjdpfx Aexd T Hceb Uor - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 54 kg, warranty duration: 6 months, COLD WATER WASHER KARCHER HD 901 B The device has new equipment, including a pressure gun, stainless steel lance, steel braided hose and adjustable nozzle. The brass, durable head with new ceramic pistons and seals guarantee long and trouble-free operation. The very efficient Honda GX270 combustion engine ensures stable operation even with long-term use. Thanks to the operating parameters of 200 bar and 750 l / h, the machine can be effectively used for heavy work in construction, the logistics industry and agriculture. Each device we offer has individually taken photos, you buy exactly the machine you see. TECHNICAL DATA: Power supply: Combustion Engine: Honda GX 270 Pumping capacity [l/h]: 750 Working pressure [bar]: 200 Maximum pressure [bar]: 230 Cgodpev S E Ursfx Ab Usr Weight [kg]: 54 Dimensions (length x width x height) (mm): 1045 x 582 x 670 Hose length [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw couplings - FREE