Metal lathe

Rogi WM460Ax1000

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm Dcodpfxsirax Uj Apwsk -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Dedpfjd Anz Rsx Apwock Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Dcjdpsxtbf Eofx Apwok Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Dedpfx Aow Emf Dopwock

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 size 5 Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop Dcedpfxexz Rfks Apwok • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: Dedpfx Aowrm Dtspwock >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 Dcsdop S Schepfx Apwjk 2x available! x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Immediately ready for use Free loading, transport no problem.

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Dsdpfex H Rmusx Apwjck Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Dodjwu Du Iepfx Apwjck Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Dsdpfx Apsmhm Aqjwsck Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling