HELLER MC 20

HELLER MC 20

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: SIEMENS, controller model: 840D sl, number of axes: 4, This 4-axis HELLER MC 20 was manufactured in 2019. It features a Siemens 840D sl control system, with X, Y, Z travels of 800 mm, 750 mm, and 800 mm respectively. The spindle supports a speed range of 5-16,000 rpm with a drive power of 34 kW. It includes a 44-position tool magazine and a rotary table diameter of 520 mm. Consider the opportunity to buy this HELLER MC 20 horizontal machining centre. Contact us for more information. • Working area: • Feed forces (X/Y/Z): 10,000 N • Speeds and dynamics: • Rapid traverse X/Y/Z: 60,000 mm/min Ffjdpfoyf Nntjx Afnou • Acceleration: X = 7 m/s², Y = 8 m/s², Z = 6 m/s² • Spindle / machining unit (HSK-A63): • Tool interface: HSK-A63 • Spindle diameter in front bearing: 70 mm • Tool management: • Tool magazine type: HSK-A63 • Number of tool positions: 44 • Max tool weight with all pockets occupied: 6 kg • Max tool length: 550 mm • Max tool diameter: • With all pockets occupied: 120 / 80 / 80 mm • With adjacent pockets free: 150 mm • Minimum chip-to-chip time (VDI): approx. 3.3–4.4 s • Rotary axis: • A-axis with rotary table diameter: 520 mm • Interference circle diameter (A-axis): 1260 mm • A-axis speed: 17 rpm • Indexing resolution: 360,000 × 0.001° • Indexing accuracy (VDI/DGQ 3441): 12 arc sec • Measuring system: Direct, absolute linear scales • Utilities: • Power supply: 400 V / 50 Hz • Total connected load: approx. 27–30 kVA • Compressed air requirement: 4.5–6 bar • Condition and documentation: • Machine is in very good technical condition • Complete service documentation available Additional equipment • Dedicated loading and unloading system

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, Swing over crosslide: 660 mm Turning length: 1540 mm Spindle bore: 91 mm Spindle speed main/sub: 4000/5000 rpm Tool magazine: 76 positions Taper in milling spindle: Capto C6 Milling spindle speed: 12000 rpm Spindle motors: 26/22 kW Max power supply: 200V/255A Year of manufacture: 2013/9 Length: 5825 mm Width: 2850 mm Height: 2750 mm Weight: 15860 kg Full B-axis Coolant through milling spindle: 70 Bar Knoll 110/700 Part picker & outfeed belt Automatic presetter for lower turret & milling spindle Robot interface (no robot), automatic door & prepared for barfeeder Spindle 2 tailstock function Fedox A E U Nspfx Afnsfu Renishaw OMP60 probe MAPPS-IV CNC 5-axis simultaneous control 5 extra M-codes

Condition: used, Year of construction: 2019, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 56608, Heller MC20 machine in perfect condition. Very low cycle count, approximately 180,000 produced parts. Regularly serviced. Complete machine documentation available. 5-axis machine. More information upon request. Ffjdpfjx A Tvnox Afnou

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min Ffodpsw Dgcajfx Afnsu tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 700 mm z-travel 550 mm Control Heidenhain TNC 530 Fjdpfxjx Rur Ao Afnefu

Condition: used, Year of construction: 2011, functionality: limited functionality, bar passage: 51 mm, overall weight: 6,000 kg, bar capacity 51 mm – three turrets – three Y axes – fixed/driven tool holders – LNS Sprint 552 bar feeder new in 2011 – Fanuc Control Fjdpowvvyrjfx Afnefu

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Fjdperx Sh Aefx Afnofu

Condition: good (used), Year of construction: 2008, operating hours: 121,665 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, controller model: Heidenhain iTNC530, rotary table diameter: 280 mm, rotational speed (max.): 18,000 rpm, overall weight: 9,500 kg, operating hours of spindle: 59,846 h, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Heidenhain iTNC 530 Spindle HSK63 18,000 rpm (new spindle 08/2024) 32 tool positions plus additional magazine ZM157 Rotary table SRT 280 mm worm drive 6-way rotary union on the table for zero-point clamping system External coolant supply Chip flushing pistol Oil mist extraction Internal coolant supply 40 bar Automatic cabin door Blow-off device Chip conveyor Handwheel Thermal compensation Renishaw probe Kinematic option Preparation for BLUM tool measurement fork version Preparation for PCS order management Interface for robot RS2 (we currently have a suitable RS2 robot with control system and pallets available in a current auction) Ffodpoyc Nkpofx Afnsu Machine ON: 121,665 h Spindle ON: 59,846 h (new spindle 08/2024) Very well-maintained condition

Condition: excellent (used), CNC Lathe with y-axis DMG MORI - CTX BETA 800 4A MACH-ID 9282 Make: DMG MORI Type: CTX BETA 800 4A Control: Siemens 840 D-SL Fjdexuqw Hopfx Afnofu Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Accessories / Equipment: Ffodoxt Uqhepfx Afnou - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions - Pick-up station - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -