Tube bender

Herber 750RL

Condition: new, Model Name Gsdsgvqzcepfx Abrotu Airtower FT 20.000

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator Gtodpfxew Ivk Ts Abrsu 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure Gjdpfxsvkkl Tj Abretu - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system - Automatic switch-off - Automatic switch-off of the machine at open cover, torn belt, reduced belt tension - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. Gtedpfxjgwt S Te Abreu It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm air pressure 6 - 8 bar working area Radius 1000 mm weight of the machine ca. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. Gedpfx Abefg U Smeretu - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! optional: - Clamping table with T-slots clamping surface 900 x 600mm

Condition: new, original Siegmund welding table perforated plate octagonal 2D or 3D 1200 x 200 with 28 mm hole 514 kg, diameter 1300 mm plasma nitrided original price 8900.-€ Gjdpfx Abjt Sk Ndsrotu in combination with positioner half price sold only in combination with positioner Hole holder 8 hole 500 x 500 diameter 18mm (see picture)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) Gtsdpfel Dw D Eex Abrsu - Weight: 3560 kg

Condition: new, Year of construction: 2025, Power at 50%: 20kVA Short circuit-current: 11,6kA Electrode force: 180daN Throat depth: 455mm --- Weld control: WS 402 (4-times, 2-program) --- Extra Equipment: - foot pedal - main switch Godpfek E Hnuox Abretu --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Gjdofzktzjpfx Abrotu Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm Gtodpfx Aewd Ii Ujbreu - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg