Vertical machining center

HERMLE C 400U

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm Djdpfx Ansylw Stjwsut • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 9,000 h, stroke length: 350 mm, overall weight: 8,300 kg, working width: 3,100 mm, bending force (max.): 100 t, Equipment: CE marking, A ready-to-use TRUMPF TruBend 3100 press brake from 2017, in like-new condition. This powerful and reliable machine is ideal for professional sheet metal work, delivering excellent precision and performance. The machine features a maximum press force of 100 tons and is equipped with an advanced control system with graphical visualization. It has only 9,000 operating hours on the clock. Extra benefit: upon purchase, we offer one week of training at our facility, ensuring you can start working immediately and efficiently. Key specifications (2017 model): - Press force: 1,000 kN - Bending length: 3,060 mm - Distance between uprights: 3,384 mm - Usable installation height (+extra option): 500 mm - Controlled axes: standard 4 axes (Y1, Y2, X, R) - Backgauge system: fast and precise CNC backgauge Dujdeybax Uspfx Anwjt - Control system: TRUMPF T3500T with 3D color/graphical visualization Main options and features: - Increased installation height: provides a 500 mm opening for complex/tall components - Tool clamps: hydraulic tool clamping systems for rapid setup - Bending aids: maximum two height-adjustable bending aids (lifting capacity up to 150 kg) for handling large parts - Safety system: BendGuard automatic laser field monitoring - LED lighting: LED work area lighting in front and rear - Software: DXF import for 2D programming We also provide the machine's maintenance history and an overview of replaced parts, such as the BendGuard. The last maintenance was carried out in August 2025. For further information or any questions, feel free to contact us.

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. Dedpfx Anoxw Ih Uewsut - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating)

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Dedpfx Anouyk N Ijwjut

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 220t 4m, 8 axis Press Brake Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Dsdpfx Anov S U Izjwjut Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2300 mm Measurements depth 4400 mm Measurements height 3100 mm Machine weight 7000 kg Control Unit Model Siemens 840 D Main Drive Spindle speed range 10000 Movement X-Axis Movement 2500 mm Y-Axis Movement 900 mm Z-Axis Movement 850 mm Tools Slots in storage 40 Djdsx D Narspfx Anwout This Hexagon PIONEER 061006 was manufactured in 2013. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Ideal for ensuring product accuracy and consistency. Contact us for more information. Application Types Measuring

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws Dsdpjw Ebdbofx Anwsut - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 5, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. Dodpfx Aey Al Ufonwsut • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain Mill Plus V600 weight of the machine ca. 7000 kg Duedpfxjwgi Dre Anwjt

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Pictures/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine energized): 26,492 h The actual operating hours are significantly lower. Based on experience, spindle run time (actual turning) accounts for approx. 30% to 50% of this (i.e. approx. 8,000 to 13,000 hours). Technical specifications: Dusdpfx Asvphv Tjnwjt Working area: Center height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Center distance: 750 mm Lathe spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed motors Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.