Universal machining center

HERMLE C 600 U

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 450 A-axis travel mm: +/- 110 C-axis degrees: +/- 360 Number of pallets: 1 Table dimensions mm: - Max. table load kg: - Feed rate mm/min X, Y, Z: 20,000 Max. rapid traverse m/min X, Y, Z: 35,000 Spindle speed rpm: 50 - 10,000 Spindle power kW: - Taper type: ISO-SK40 Torque Nm: - Tool changer type: Chain Tool changer positions: 30 Max. tool diameter mm: - Max. tool diameter with adjacent pockets empty: - Max. tool length mm: - Max. tool weight kg: - Coolant tank capacity l.: - Through-spindle coolant bar.: - EQUIPMENT: Zero-point clamping system: EROWA MTS / EROWA MTS RENISHAW OMP60 probe Kodpfjxak A Hex Agzjfa MACHINE DIMENSIONS Length mm: 2,130 Width mm: 2,300 Height mm: 2,750 Weight kg: 6,500

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine Kfsdpfx Asxcgtgjgzja - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: good (used), Year of construction: 2000, Description FOR SALE 4TH Hermle C 600 U machining centre Ksdpfx Asx E Ryregzofa 5 AXIS YEAR 2000 CNC Control: Typically equipped with a Heidenhain TNC 430 system, which was the benchmark for 5-axis machines of its era, or sometimes the newer Heidenhain iTNC 530 system. Axis Configuration: 5 simultaneous axes (if option chosen), with integrated tilting rotary table. Machining Travels (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle Speed: Often fitted with a 15,000 rpm or 16,000 rpm spindle for high-speed machining (HSC). Spindle Taper: SK 40 or HSK 63. Tool Capacity: 30-position automatic tool changer. Weight: Approx. 6,500 kg, testifying to its solid, stable construction. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Kfodex D Iywepfx Agzja Number of axis 5 Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Additional Equipment Oil mist extraction Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Kfodpfx Aet Hr Ahegzea Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: used, Year of construction: 2000, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 430 turning speeds 10.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 600 U equipped with a 30-tool changer, a swivel axis, and an NC combination table (600 x 370mm / ø 280mm). The machine has approx. 17.754 H spindle hours. Additional equipment: - Swivel axis - NC combination table (600 x 370mm / ø 280mm) - Probe system (SK 40 - RENISHAW) - Tool breakage monitoring The machine is in well-maintained condition, has been used exclusively for educational and training purposes. For further technical details, please refer to the offer. Kedpfjv T Nr Rjx Agzjfa - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 600 | C600 | C-600 | C600U

Condition: good (used), Year of construction: 1999, HERMLE C600 U 5 AXIS MACHINING CENTRE WITH HEIDENHAIN ITNC430 CONTROL Kfedpfx Agex A Hgtozea UKUK Table Dimension Ø280mm (4 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=600mm, 'Y'=450mm, 'Z'=450mm, 'B'=220° (±110° ), 'C'=360° . Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. 30 Position ATC. S/No. 12859 (1999).

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red Kfedpfx Agom Nbwtszea RAL7016 anthracite gray Mach. no.: 344025 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: excellent (used), Year of construction: 1998, operating hours: 148,086 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, rotational speed (max.): 12,000 rpm, overall weight: 6,500 kg, coolant supply: 20 bar, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain TNC 430 (handles modern trochoidal paths without issues) Year of manufacture: 1998 Basic dimensions (L/W/H): 2.5 x 2.1 x 2.7 m Kfjdpfx Ajxz A Nnsgzja X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Highlights: Tool measurement / workpiece probe / LED machine lighting / HSK63 / V2A stainless steel interior cladding / ICS (internal coolant supply) / chip conveyor / external air with cold air nozzle via M-function / status LED signal lamp Spindle Data Spindle mount: HSK A 63 (12,000 rpm) Tool magazine: 30 positions Feeds and Speeds Feed rate range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control on-time: 154,435 h Machine on-time: 148,086 h Program runtime: 49,428 h Spindle hours: 46,014 h Drive hours: 77,927 h 5-axis postprocessor for Fusion 360 included Inspection and demonstration by appointment. Price is net, plus VAT.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, The machine is in good technical condition and can be tested by prior arrangement. The current condition corresponds to its age, and we currently have no issues with the machine. On 16.03.2022, the tool magazine door was replaced. On 28.08.2023, the SIMODRIVE 611/18A servo converter was replaced. SK 40. Spindle hours: 18,396, machine hours: 56,040. Number of axes: 3. Machine video available upon request. Heidenhain 530. Kedpfx Agexyip Sozofa

Condition: excellent (used), Year of construction: 2000, DESCRIPTION Hermle C 800 V CNC vertical machining center was built in 08.2000 in Germany. The milling center operates in three axes and the maximum X / Y / Z travels are 800, 600 and 500 mm. The machine is equipped with a Sinumerik 840D numerical control with a LAN cable to an external computer. In addition, the lathe is equipped with, among others: Chip conveyor, Hydraulic clamping, Magazine for 87 tools, Turning finder and Control cabinet air conditioning. The spindle rotates at a maximum speed of 15,000 rpm. Spindle hours approx. 4500 h. The total weight of the milling center is approx. 7 tons. Technical data of the Hermle C 800 V CNC milling center - Travel X / Y / Z axis: 800/600/500 mm - rapid traverse: 35 m/min - maximum spindle speed: 15.000 rpm oil mist extraction - spindle power: 19 kW - operating voltage: 400V; 3PH; 50Hz - control voltage: 220V AC; 24V DC - machine dimensions (L x W x H): 2,3 x 3 x 2,65 m - Total weight: 7000 kg Equipment of the Hermle C800V CNC milling center - CNC control: Sinumerik 840D - Tool magazine capacity: 87 pieces - Lamp sockets: SK40 - cooling pump through the tool: 40 bar - control cabinet air conditioner - rotating viewfinder - chip conveyor Kfedpfjiva Dkjx Agzja Separately additionally available with to see on the photos! tool presetter Various SK40 holders Touch probe Heidenhain TS32 Neuwetig

Condition: good (used), Year of construction: 2000, FOR SALE 3RD Hermle C 600 U Machining Centre 5 AXIS YEAR 2000 Numerical Control (CNC): Typically equipped with a Heidenhain TNC 430 system, which was the standard for 5-axis machines at the time, or in some cases the newer Heidenhain iTNC 530 system. Axis Configuration: 5 simultaneous axes (if the option was selected), with an integrated tilting rotary table. Machining Travels (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle Speed: Commonly fitted with a 15,000 rpm or 16,000 rpm spindle for high-speed machining (HSC). Kedpfxex E Ryfj Agzsfa Spindle Taper: SK 40 or HSK 63. Tool Capacity: 30-position automatic tool changer. Weight: Approx. 6,500 kg, indicating its robust and stable construction. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Machine parameters: Kfsdpfx Asxyipfegzoa Travels in X, Y, Z axes: 650X450X450 mm Description: The machine is in good technical condition; test runs are possible by prior arrangement. HSK 63. Heidenhain 426/430. - The current condition corresponds to the machine's age, and there are currently no issues. X-axis ball screw was replaced on 5.1.2022. Hydraulics were overhauled on 25.4.2024. - Spindle hours: 41,273, machine hours: 89,892 - Number of axes: 5. Video of the machine available on request.

Year of construction: 2002, condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header MULTIPRESS MP610LS Kfjdpfsh Tkrasx Agzoa Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Max. KO length (die side): 80 mm Max. PKO length: 23 mm Max. Speed: 180 ppm

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, for sale PREMIER Hermle C 600 U machining centre manufactured in 2001 5-AXIS Year of manufacture: 2001 Numerical Control (CNC): Typically equipped with a Heidenhain TNC 430 system, which was a benchmark for 5-axis machines at the time, or sometimes with the latest Heidenhain iTNC 530 system. Axis configuration: 5 simultaneous axes (if option selected), with integrated tilt rotary table. Travel distances (X/Y/Z): X: 600 mm Y: 450 mm Z: 450 mm Spindle speed: Often configured with a 15,000 or 16,000 rpm spindle for high-speed machining (HSC). Spindle taper: SK 40 or HSK 63. Tool capacity: Automatic 30-position tool changer. Kedpfx Asxzz Szegzefa Weight: Approximately 6,500 kg, indicative of its massive and stable construction. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS