CNC milling machine

HERMLE UWF 900 E

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, rotational speed (max.): 4,000 rpm, table load: 400 kg, controller model: Heidenhain TNC 407, TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 400 mm Clamping surface: 900 x 468 mm Maximum table load: 400 kg Tool holder: SK40 Spindle speed range: 20 – 4,000 rpm Drive power: 5.9 kW Kedpfx Aoyf Agcob Tswu Tool changer: 32 positions (HTC 32) MACHINE DETAILS Control: Heidenhain TNC 407 Dimensions & weight Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Machine weight: approx. 3,500 kg Note: The machine's Simodrive is defective.

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Kwedpfowglfxex Ab Tou Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 16-station tool changer Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Kwodpfjl Dvx Eox Ab Tsu Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: good (used), Year of construction: 1995, Travel: X = 600, Y = 400, Z = 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Taper: SK 40 Quill stroke: 75 mm Spindle motor: 5.9 kW Kwedpfx Asw Uin Seb Tsu Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping surface: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, various tools (without cabinet)

Year of construction: 2006, condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Kjdpfx Abovi N D So Tewu

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min Kedpstqmm Asfx Ab Tewu total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Kodjwaaqispfx Ab Tswu Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter - Hydro-mechanical tool clamping vertically and horizontally - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system - Fixed angle table - Fully protective cabin - 32,279 recorded spindle operating hours - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Kwsdpfxsf Nku Rj Ab Tju Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: good (used), Year of construction: 1991, Travel range: X= 600, Y= 400, Z= 420 mm Speed range: 20 – 4000 rpm Gear stages: 3 Spindle taper: SK 40 Kwedpfxowvif Uj Ab Tsu Quill stroke: 75 mm Spindle motor: 5.9 kW Feed range: 1 – 5000/6000 mm/min (manual/programmed) Rapid traverse x, y: 7 m/min Rapid traverse z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electronic handwheel, measuring probe (defective)

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Kwodjwhk Ubepfx Ab Tsu Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²