Carcase press

Hess Express CASEY

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) Lhodjiidm Nspfx Ancjl - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Max. panel length: 2000 mm Length of conveyor: 3500 mm Panel return for edgebander: Right Lhsdjx A Tggjpfx Ancel

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Lsdpfxstrbrqs Ancshl

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Weight: 1,250 kg Ledpodlhbpofx Ancohl PLC control cabinet: 380 volts

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Lodedy Hm Dspfx Ancjhl Machine stand

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Ljdpfx Aeu Iwyisncehl Machine is not connected. Sale at a low selling price. *

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar Ljdpfx Anonxkm Eocjhl

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Ledpfxozc Ilxe Ancjhl

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Ledpfx Aoxtgz Ejncohl Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Year of construction: 2021, condition: new, Cantilever rack, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW -: Price ex location including loading! 1 shelf unit with 4 stands € 3.875,- (net)! Price for transport within Germany (excluding islands): € 550,- (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Lhsdpjddmq Tsfx Ancel 4 uprights, double-sided, approx. 5.18 m high, hot-dip galvanized IPE 180/80 each with 2x3 adjustable. Arms 1.20 m, 500 kg load capacity per arm with bandages approx. 1.30 m Shelf uprights on both sides approx. 5180mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 2600 kg per stand side with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!