Hydraulic plate shears

Hesse & Co DHGM 3016

Condition: used, Year of construction: 2018, pressure 800 t stroke 80 – 360 / 400 mm no. of strokes 3 – 60 /min distance between columns 4200 mm dayligth (stroke and adjustment up) 1400 mm column travel -side 1800 mm table surface area 4000 x 1800 mm hole in the table 3400 x 450 mm table height over floor 950 mm ram surface 4000 x 1700 mm ram adjustment 305 mm material width 800 mm material thickness 0,7 - 6,0 mm material cross-cut 2800 mm² power requirement 475,0 kW Weight 154,00 t dimensions of the machine ca. 6,05 x 3,95 x 7,7 mxmxm total height over floor 6,6 m Fjdpfxjw D Hkdo Ah Usgi Servo-Press (Press, Coil Line, Transfer) - Press Schuler, MSD 2-800-4.0x1.8-400 Servo - eccentric drive in transverse-shaft design via 2 torque motors, hydraulic overload protection, motorised ram adjustment, ram counterbalance, main control panel with TFT touch colour display motor-driven retractable change plate, hydraulic slide-in clamping elements - Coil Line Schuler-Automation AC-UEL-M-0800 / AC-SH-9-70/160-0800 R-L / AC-RM-EHP-0800 Transfer Schuler-Automation AT2-M-800-500-405

Condition: used, Hydraulic guillotine shear STEINER type HTS 30/20 R Machine. No. 315 Year of construction 1982 cutting length 3050 mm cutting thickness 20 mm backgauge 800 mm controlled motor power approx. 30 kW mains connection 400 Volt, 50 Hz - backgauge with positioning control ELGO - backgauge adjustment via ball screws - Safety light barrier SICK at the front as intervention protection - 3 material support arms with ball rollers - electric foot switch - spare blade Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space requirement for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul. Fjdpod Hxx Asfx Ah Uegi

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Fjdpfx Aed A Hbceh Usgi Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Year of construction: 2008, condition: used, pressure 315 t stroke 40-200 mm no. of strokes 20-100 Hub/min ram - range of adjustment 120 mm ram surface 2000x1100 mm table surface area 2000x1200 mm hole in the table 1700x250 mm Fodpfx Aordi Dlsh Uegi 500 mm column travel -side 820x650 mm total power requirement 45 kW weight of the machine ca. 44 t

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.11.08, Fresan FP 40P - C Frame Eccentric Press - 40 Tons (400kN) TECHNICAL DATA: * Power: 40 tons (400kN) * Strokes Per minute: 125 * Ram-Table Distance: 320 mm * Stroke Adjustment: 0 - 84 mm * Ram Adjustment: 70 mm * Table Dimensions: 450 x 650 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces Fgedpfx Aenwmh Soh Uei * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Fgedjif Sg Sepfx Ah Uji Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.11.08, Fresan FP 30P - C Frame Eccentric Press - 30 Tons (300kN) TECHNICAL DATA: * Power: 30 tons (300kN) * Strokes Per minute: 140 * Ram-Table Distance: 305 mm * Stroke Adjustment: 0 - 60 mm * Ram Adjustment: 60 mm * Table Dimensions: 400 x 600 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations Fgjdpfjnwfrusx Ah Usi * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Double body press safety valve * Safety PLC control (Pilz) * Covers with safety switches * Light curtains around work table * Ram with 4 sliding surfaces * Mechanical fuse for overload protection (Starting from 20 tons) * Pneumatic counterbalance cylinders (Starting from 40 tons) * Central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Automatic central lubrication * Speed control with AC inverter * HMI / Touchscreen operator panel * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: excellent (used), Well maintained tool grinding machine with rotating grinding head for 2 different grinding wheels. Wet grinding with pump and tank. Fgjdpjlxpckefx Ah Uei All angles adjustable. Diamond grinding wheel. Pneumatic carriage control.

Year of construction: 2023, condition: new, pressure 40 t Fsdpfjp Udupox Ah Uegi throat 195 mm stroke 8-78 mm no. of strokes 76-190 Hub/min ram - range of adjustment 60 mm table surface area 650x380 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 2,2 t dimensions of the machine ca. BxTxH 1450x1220x2110 mm

Condition: refurbished (used), Year of construction: 1999, TECHNICAL FEATURES: Press Model: T50 CNR4 Year of construction: 1999 Rated force: kN 500 Mass: kg. 3.500 Strokes per minute: No. 90 Max. insertions per minute: No. 41 Min./max. operating air pressure: BAR 4÷5.5 Stopping time: s 0.117 Safety distance: mm 187 Energy: KJ 2000 Min./max. adjustable stroke: mm 8÷100 Mace adjustment: mm 70 P.M.I high adjustment: mm.280 Maximum extraction stroke: mm. 30 Work surface area: mm 770x530x58 Mace plane size: mm. 450x300 Shank diameter: mm. 45 Overhang from the center: mm 270 Max. mold size: mm 450x300 Upper mold mass: kg 84 Voltage: V 400 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts NEW COMPONENTS INSTALLED: - Engine bearings; - Flywheel bearings; - Engine belts; - Clutch plates; - Front accident guards; - Work surface brightened on CNC machine; Fgedeqbtc Nopfx Ah Usi - Foot pedals.