Fixed steady rest

HEYLIGENSTAEDT 600

Condition: used, bore capacity in steel (diameter) 120 mm arm length 2500 mm workpiece height max. ca. 1800 mm bore capacity in cast iron 160 mm drilling radial min./max. 880 / 2825 mm throat min. 555 mm Djdpfxjvh Ncxs Ap Ioku column diameter 650 mm bore spindle diameter /taper 90 / MK 6 mm diameter of quill 160 mm bore spindle turning speed range 10 - 660 U/min bore depth 650 mm feeds 0,07 - 3,0 mm/U distance spindle/base plate min. 300 / max. 2100 mm vertical adjustment of the arm 1150 mm base plate surface area 3000 x 1550 mm total height of machine 4500 mm total power requirement 15 kW weight of the machine ca. 16 t - right-/left spindle run - thread cutting device Accessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm Dksdpfx Aou Id Dbop Ieu spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Year of construction: 2000, condition: used, turning diameter 530 mm turning length 1500 mm control Fagor centre height 260 mm swing diameter 475 mm swing diameter over flat guideway 530 mm swing diameter over bed slide 315 mm bed width 350 mm spindle bore 80 mm spindle taper innen MK5 turning speeds 2 turning speed range 0-650/650-2500 U/min feed range 0 - 7000 mm/min rapid traverse 10 m/min diameter of quill 72 mm quill travel 180 mm weight of the machine ca. ca. 3,5 t Dkodpsiu A Daefx Ap Iou dimensions of the machine ca. L/B/H 3,50x1,50x180 m

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, swing diameter over cross slide: 820 mm, swing diameter over bed slide: 1,120 mm, controller manufacturer: NUM, controller model: 1020 / 1040 / 1060, distance between centers: 7,000 mm, year of last overhaul: 2007, Conventional high-capacity parallel lathe, refurbished in 2007, Dkjdpox H S Dbjfx Ap Iju equipped with NUM CNC control, a large-size chuck, and a chip conveyor

Condition: used, Year of construction: 2009, operating hours: 4,963 h, functionality: fully functional, VIPER VT 40A / 3000 (2009) Manufacturer: VIPER Type: VT 40A / 3000 CNC turning machine Dodpfjzy N D Ajx Ap Ijku Year of manufacture: 2009 Condition: Used Operating hours: 4963 h Control: Fanuc 21i Swing over bed: 1000 mm Max. turning diameter: 860 mm Maximum turning length: 3,000 mm Spindle bore: 131 mm Spindle speed: 2,000 rpm Motor power: 55 kW Tool turret with 12 stations Bed design: Heavy-duty, 45-degree inclined bed made of Meehanite cast iron with flat guide.

Condition: used, Year of construction: 1994, faceplate diameter 1250 mm swing diameter 1400 mm turning height 1500 mm Control Siemens type 880T Table load 6000 kg cross rail - adjustment 700 mm Max ram stroke 1000 mm turning speeds 400 U/min transmission ratio 2 Feed 3-8000 mm/min total power requirement 69 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Djdpfeyqvu Djx Ap Ieku If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Dksdpfx Asx Ik Tdjp Iou subject to prior sale!

Condition: good (used), Spare parts suitable for a high-performance universal lead and feed screw lathe VOEST DA 210-2000 - Apron (clutch box) - Lead, feed, and shifting screw - End bearing block - Spindle support - Change gears - Rack bars Dkodpfxjw Sfigj Ap Iou Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), suitable for a high-performance lead and feed screw lathe VDF 18 RO Dsdew Sfimspfx Ap Ijku Bed slide unit with top slide and simple steel tool holder Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel