Used AD planer Holzprofi STÖ310V

Holzprofi STÖ310V

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90 – 45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 310 mm Maximum thicknesser width 308 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 2.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Planer table dimensions (L×W) 1300×310 mm Weight Hedpfx Aijvxh Rvo Nsnp 250 kg Motor speed 2800 rpm Motor power s1 3.0 kW s6 4.2 kW Power supply 3-phase, 400V

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Hsdpfx Aspr Uvrsi Njnp

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 Hnjdpfox U U Ekox Ai Nop The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch Hnodpfewrm Dtjx Ai Njp >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: ready for operation (used), Year of construction: 1977, A roller wide belt brushing machine Tilleke is available. Working width: 700mm, Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, Weight: approx. 750kg. An on-site inspection is possible. Hsdpfx Aoynltqji Nonp

Condition: used, Year of construction: 2019, used, top condition, low hours with Tersa cutterblock Make: SCM-Minimax Hnodpfey Apfusx Ai Njp Model: FS41C Year of manufacture: 2019 Machine No.: KK00003566 CE type-tested Motor: 5 kW Planing width approx. 410 mm Planing height approx. 220 mm Table length approx. 900/900/1800 mm Bridge guard Slotted table lips Low-noise table lips automatic brake Number of knives: 3 pcs Knife system: - Tersa reversible knives Digital display for planing height, analog Integrated extraction hood Original price approx. 5500 € Extraction connection: 2 x 120 mm diameter Space requirement approx. 2000 x 800 x 1000 mm Weight approx. 320 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without any warranty or guarantee.

Condition: good (used), Year of construction: 2004, Excavator CATERPILLAR 315 C no. CAT0315CTANF00406, 83 kW, year 2004 Hnsdpfx Aoydnxbji Nsp

Condition: used, Surface and thickness planer Scheppach HMC3200, year of manufacture 1993, in good condition, 2.9 kW, 320 mm table width, 1380 mm table length, 150 kg Hodpex H Ugxefx Ai Njnp Price changes reserved, subject to errors and typographical mistakes.

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw Hnsdpfx Aem Sk H Iji Nop -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg

Condition: new, Year of construction: 2022, Working width: 410 mm Planing height: 230 mm Planer cutterhead: Tersa Number of knives: 3 Hnjdpoi Ezr Eofx Ai Nep Height adjustment: Handwheel Planed thickness display: Scale Feed rate: 7 m/min Infeed roller: Steel Pressure bar: - Outfeed roller: Steel Table rollers: No Motor power: 4.4 kW Dust extraction connection: 100 mm Machine length: 800 mm Machine width: 700 mm Weight: 205 kg