IEMCA BOSS 332-E bar feeder

IEMCA BOSS 332-E

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance Todpfx Afsf A Nq Ajged • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Tedswv Hnmjpfx Afgjd Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC Tedpfswfdbcsx Afgod R 620 R 360 So DL R185 EC-KF Rcc4 Set Blasting: RSKI 1000 RSKI700-3d-atex RT 250 euro AM: C1 M1 M1 Basic S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, tumbling, and blasting technology.

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Tsdpfsglp Nqsx Afged Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: used, Year of construction: 2003, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 256 mm Tjdpew Ekr Iofx Afgsd max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 450 kg with AWF ( Automatic Wire Feeding )

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Tedpfx Afeh Rdxnjgsd Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, Year of construction: 2014, Manufacturer Citizen Machinery Miyano Co., Ltd., Japan Model BNA 42DHY2 Year of Manufacture November 2014 Serial Number DK4Y1085 Control Fanuc Series 0i TD CNC Machine Type CNC Twin Spindle Turning Center with Y Axis Country of Manufacture Philippines Capacity Maximum Bar Capacity: 42 mm Maximum Turning Diameter: Approx. 42 mm Maximum Turning Length: Approx. 100 mm, depending on workholding Main Spindle: Built in spindle Sub Spindle: Yes Y Axis: Yes C Axis: Main and Sub Spindle Turret: 12 station live tooling turret Live Tooling: Yes Travels X Axis: Approx. 135 mm Z Axis: Approx. 320 mm Y Axis: Approx. ±40 mm Spindle Main Spindle Speed: Up to approximately 6,000 rpm Sub Spindle Speed: Up to approximately 6,000 rpm Spindle Nose: 42 mm bar capacity Rapid Traverse X Axis: Approx. 24 m/min Z Axis: Approx. 30 m/min Y Axis: Approx. 12 m/min Electrical Power Supply: AC 200 V Phase: 3 Phase Frequency: 50 / 60 Hz Rated Power: 30 kVA Full Load Current: 87 A Short Circuit Interrupt Rating: 2.5 kA Machine Weight Weight: 3,100 kg Equipment Visible on This Machine Fanuc Series 0i TD CNC Control Todpfjzmh R Usx Afgod Twin Spindle Y Axis C Axis Live Tooling Hydraulic Chuck Coolant System Fully Enclosed Splash Guard Emergency Stop Electronic Handwheel

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining Center Year 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production. Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation. Tedpfx Ajy Tkc Asfged The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine. Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H). Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Control: Heidenhain iTNC 530 Spindle speed: 24000 - rpm Travel Y-axis: 600 - mm Dimensions of the clamping surface: 900 x 600 mm Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Weight approx.: 8,300 kg Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 2010, A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 , laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguishing system available, machine power-on hours: approx. 86589h, spindle operating hours: approx. 66997h. The machine is available from November 2026. Documentation available. Inspection possible by arrangement. Tsdpfozu Szmjx Afged

Condition: excellent (used), Year of construction: 2010, Palmary GU20x40NC universal grinding mahcine Year: 2010 SPECIFICATIONS: Capacity Swivel over table Ø210 mm Distance between centers 400 mm Max. external grinding diameter Ø200 mm Max. load of centers 60 kgs Grinding wheel O.D. x width x I.D. Ø355 x 38 x Ø127 mm Linear velocity 33 M/s Grinding wheel - X axis Manual distance 135 mm Auto. rapid advance 25 m/min Max. stroke 185 mm Tjdpfx Ajytftbefgjd Min. setting unit 0.001 mm One turn of handwheel (graduation) 2 (0.005) mm Table - Z axis Traverse speed 1.5 m/min Max. stroke 480 mm Auto. reciprocate min. stroke 8 mm Feed of one turn of handwheel (2-step) 20 mm (2 mm) Swivel angle -3° , +12° Work spindle head Swivel angle -30° ~ +90° Center taper M.T. No. 3 Spindle speed (variable) 10~300 r.p.m. Max. load of spindle (tool holder included) 15 kgs (max. length: 100 mm) Tailstock Center taper M.T. No. 3 Stroke 20 mm Fine adjustment range ±0.03 mm Motor Wheel spindle 2.2 kW (4HP) Power Total voltage 7 KVA Tank Wheel spindle lubricant tank 7 L Hydraulic tank 46 L Coolant tank 110 L Machine weight 2000 kgs Accessories/options: - grinding wheels - flanges - internal grinding spindle - Marposs activ measuring system - DRO system for 2-axis, SINO - hand tools - documentations Under power in our warehouse.