Ilapak VT1000 Vertical Packaging Machine

Ilapak Vegatronic 1000

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more Csdeiniz Dspfx Ah Uept convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,900 mm, total height: 3,000 mm, total length: 19,500 mm, type of input current: three-phase, warranty duration: 12 months, overall weight: 13,000 kg, table width: 800 mm, The line is designed to produce EURO 1200/800 pallets . Codot Tbuyjpfx Ah Uopt In order to nail the pallets efficiently, three people are needed to operate it: to for stacking bottoms one person and for stacking pallet tops two people. The capacity of the machine is 2500 pcs per 8h, also it depends on the workers and their speed in stacking the pieces. The pallet after being nailed together is received by the milling machine, which mills the pallet, cuts the corners and burns the marks, after which the pallet enters the stacking machine, which cuts the pallet to a size of 1200, rotates it and stacks it with an elevator . Stacking can be done in a so-called sandwich (29 pieces), or individually up to (20 pieces). pieces). Behind the stacking machine is storage for three pallet poles. The line is adapted for sawdust extraction

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Cpodpfom Uyknox Ah Uet

Condition: new, Year of construction: 2024, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes LNM3500 is a flexible, compact and efficient pneumatic nailing machine for manufacturing legs for pallet production. User-friendly program, which means the changeover takes place very quickly and the machine can save settings for over 100 different legs. Three Bostitch nail guns with magazines for jumbo coils equipped with indicators. Possible to produce legs with 2-30 blocks/leg. Equipped with large cassette for boards. Protective cover for sound attenuation and for a safe function. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine can be equipped with an optimized block cutter, as well as automatic block feeding into the nailing machine. The block cutter can be mounted on the back side of the nailing machine or on the side. Dimensions for standard machine: - Boards: Length 600-3500mm, Width 60-125mm, Height 16-28mm - Blocks: Length 60-150mm, Width 60-125mm, Height 50-100mm Cpsdpfoi Hkqmjx Ah Uot Capacity: - 21 blocks/min Machine dimensions (without block cutter): - Length 9000mm, Width 1000mm, Height 1900mm The machines is CE-marked. The leg nailing machine can also be equipped with automatic stacker for finished legs. Do not hesitate to contact us for more information, pictures and videos.

Condition: new, Year of construction: 2025, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg Csdpjvk Saxefx Ah Uept • CE

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 Cedpfx Aetrd Hfjh Uopt - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm Cjdpfxoi Ezx Dj Ah Uept L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM Cjdpfx Ajg Snt Soh Uept

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Codpfx Ahow Dv Aij Uept Including DA576 feeder Magnetic separator and air gravity separator

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: AFA 4 G5a, pressure: 6.6 bar, power: 781 kW (1,061.86 HP), The steam turbine has very low operating hours and was commissioned only once. The control system is integrated into a Siemens control cabinet, Simatic Multipanel type. Scope of supply: - Operating panel - Concrete foundation - Turbine - Generator Electrical output: 781 kWe at 6.6 bar(a) pressure. • Steam turbine (AFA 4 G5a) with integrated gearbox – Electronic speed control / exhaust pressure regulation – Inlet steam pressure control (from below) – Electronic fast-acting shut-off system with a separate valve – Nozzle group valves for partial load performance optimization Cpjdpfxsu Tq Egj Ah Uet – Lubrication system according to Frankenthal factory standards, water-cooled – Safety and monitoring systems according to Frankenthal factory standards – Flexible coupling based on vibration and torsional analysis – Synchronous generator, 0.4 kV, IP 23 (optional IP 44 R), with rolling bearings and air cooling – Mechanical test run on test benches at the Frankenthal factory – Fully automatic operation via the central control system – Monitoring cabinet IP 42, including synchronization, compliant with VDE/IEC standards, to be mounted next to the generator according to supplier standards, without power section Color: Blue Origin: Germany