Gas-Fired Furnaces

Industrial Combustion

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Isdeqgfbgspfx Abrean

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Isdpfxeq U R T No Abrsan Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach. Iasdpfx Ajpugwisbrjn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 23,163 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 40, controller manufacturer: Hurco, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, overall weight: 10,900 kg, table length: 1,676 mm, table width: 660 mm, controller model: MAX5, torque: 118 Nm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, number of spindles: 1, rapid traverse Z-axis: 2 m/min, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 1,360 kg, tool diameter: 75 mm, tool length: 249 mm, tool weight: 7 g, Equipment: chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition, Full Package 🔹 Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Ijdpfxjuyt U Ts Abrjan Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Iedpfsghrgujx Abrjan Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, available immediately - Capacity: 18,000 liters - Tmax: 450°C - Internal dimensions (L x W x H): 4100 x 2100 x 2100 mm - External dimensions (L with rails x W x H with lifting door): 9970 x 3060 x 6110 mm - Control system: Eurotherm Nanodac - Temperature stability (at nominal temperature without load): ±5 °C - Automatic supply and exhaust air dampers - Electric lifting door - Electrically driven bogie hearth - Power rating: 247 ± 9% kW - 400 V, 50 Hz - Documentation, CE declaration Iasdpfeu Hma Nox Abren We are happy to offer installation, commissioning, and training for your staff. Please contact us! We supply new and used industrial furnaces. Inspection in our warehouse available on request! Furnace, furnaces, annealing furnace, kiln, hardening furnace, heat treatment oven, oven, tempering furnace, baking oven, drying oven, industrial furnace

Condition: new, Year of construction: 2023, power: 630 kW (856.56 HP), rotational speed (min.): 1,491 rpm, input frequency: 50 Hz, overall weight: 3,300 kg, Electric Motor Manufacturer: ABB Iaodsxwfgbspfx Abrsn Model: M3BP 400LKB 4 IMB3/IM1001 Power: 630 kW Year of manufacture: 2023

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling. Iajdpfxsm H Unho Abren

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, table width: 1,200 mm, table length: 4,500 mm, rotary table diameter: 1,250 mm, NC Rotary table 1250 mm with 50 Rpm Full C-Axis  360.000 with HIGH TORQ Drive HSK-100 with 90 kW and 15.000 Rpm 5 Axis simulteneous package Last service in 2023  X - Travel: 4000mm Y - Travel: 1200mm Z - Travel: 1300mm A - Axis: 105° B - Axis: 360000° Table Length: 4500mm Table Width: 1200mm Table Ø: 1250mm Spindle Taper: 100ISO/Bt/Mk Power on spindle: 90kW Speeds / ranges: 15000Rpm ATC / revolver: 60 Coolant through spindle / Bar:70 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 10500mm Width: 4500mm Isdpfxex Sqf Ij Abrsan Height: 4100mm Weight: 34000kg

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. Iaodpfx Aetmqi Djbren The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.