Shutter drill

Italpresse

Condition: good (used), Code: 0291 Brand: ITALPRESSE Model: MEC B/4 Hydraulic cold press for wood materials, panels, furniture, doors, composite materials, aluminium and various Technical data: Sturdy structure Platens dimensions mm 2300 x 1100 NEW aluminium platens top coating Opening between platens mm 300 N° 4 pistons diameter mm 70 Hydraulic control unit motor 2 Hp Dcjdjyhdqhepfx Afnjc Thrust 50 ton Overall dimensions mm 3000 x 1500 x 1700 h

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm Dsdot R T Hcopfx Afnjcc - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Technical data: Number of pistons: 4 Piston diameter: 45 mm Connection to central heating: NO Shelf dimensions: 2500x1200 mm Clearance: 460 mm Hydraulic pressing Motor power: 2 kW Power supply: 380 V Overall dimensions: Dcodpoxzrt Aofx Afnsc Length: 2900 mm Width: 1370 mm Height: 2150 mm

Condition: used, Technical data: Number of pistons: 8 Piston diameter: 90 mm Connection for central heating Shelf dimensions: 1300x3500 mm Clearance: 400 mm Hydraulic pressing Pneumatic side clamps Number of clamps: 9 Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 4200 mm Width: 1700 mm Dsdoxzdtnspfx Afnscc Height: 2350 mm

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Dcedpfed Rzc Rsx Afnjc

Condition: like new (used), - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm - Number of pistons: 6 - Piston diameter: 80mm Dsdpfsvwi Rbsx Afnscc - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: good (used), Code: 0283 Dcodpfx Ajyazdijfnec Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Dcedpfx Afeu Uvaljnjc Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: ready for operation (used), Year of construction: 2025, pressing force: 122 t, This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Additional equipment • Mylar Foil Attached to Upper and Lower Press Plates • Electronic Flatness Control (EFC) for Incorrect Loading Protection Machine Benefits Technical Machine Benefits Dedpfxoyan Sgo Afnjcc • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 pcs • Number of levels: 1 • Level opening: 370 mm • Max temperature of heating medium: 120°c • Working temperature: 70-90°c • Installed electrical heating power: 18 kw • Operating voltage: 400 v- 50hz- 3 ph Extra Information Features: Touch Screen SIEMENS 4.3 Inch TFT Digital Press Timer Digital Temperature Controller Digital Working Pressure Controller Day/Week Timer for Heating Switch-On Time Automatic Hydraulic Pressure Calculation Error Display and PLC Control Save and Recall up to 200 Work Programs Pre-Press Pressure and Time Settings Safety Devices: Two-Hand Release with Safety Circuit Safety Rip Cord around the Machine Safety Support for Lower Press Table Protective Plate for Rack/Gear Safety Instructions Sticker CE Standard Compliance CE Declaration of Conformity Special Processing of Solid Steel Heating Plate Surface Switching Off Left Cylinder Row

Condition: ready for operation (used), Year of construction: 1998, This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Additional equipment • Motorized infeed table with PVC belt • Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side • Heating plates made of solid steel, drilled and machined on all sides • Automatic loading and unloading of the panels on the 3500 mm side Machine Benefits Technical Machine Benefits • Maximum total lifting force: 110 tons • Opening: 140 mm • Power supply: 400 volt eu / 50 hz / 3 ph. + g • Electrical boiler for thermal oil: 18 kw • Devices for adjusting the working height for flatness on all uneven floors // devices for adjusting the belt tension and centering with foot switch • Construction made of assembled and welded fe430 steel beams • Cnc-machined structures for three-dimensional parallelism • Hydraulically controlled planarity with 4 racks and pinions • Protective nets and safety devices in accordance with ce regulations • Leveling devices at the base of columns for uneven floors Extra Information Dsdpfx Aoyall Rjfnscc Refurbished - without warranty Control panel with electric pressure gauge, buttons, and control switches Lifting hooks for transport by crane

Condition: good (used), Code: 0432 Brand: STETON Model: STP - CE Standard Dedpfeu N E Rxex Afnjcc Automatic hydraulic clamp with mobile beam for wooden frames, frames and various - CE Standard Technical data: Useful working capacity mm 3000 x 2000 N° 2 horizontal cylinders diameter mm 50 - 1300 Horizontal stroke kg 5000 N° 2 vertical cylinders diameter mm 80 - 1100 Horizontal stroke kg 13000 Max pressure kg/cm2 160 Motor Kw 2,2 N° 3 positions of support bar N° 7 positions of horizontal reference stops Automatic control board Overall dimensions mm 3900 x 1200 x 2680 h Weight kg 1800

Condition: excellent (used), functionality: fully functional, VERTICAL CLAMP PRESS , HYDRAULIC , model ITALPRESSE PROGRAM 30 second hand machine operation in manual and/or automatic mode with automatic piston opening timer volt. 380/50 technical data: max. useful working dimensions mm. 3000 x 1700 min. useful working dimensions mm. 250 x 340 hydraulic pump , motor power Hp 2 adjustable vertical pressure adjustable horizontal pressure Dcsdpfx Aouxdprjfnoc movable control panel base with height adjustment overall dimensions mm 3600 x 1000 x 2340 (H)

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Dsdpfodx R Tfjx Afnjcc Location: From stock 54634 Bitburg - immediately available-

Condition: excellent (used), Working width 500mm Dcodpfxett I E Ie Afnoc Motor power kW 4

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available - Dsdjxgbxfspfx Afnecc