Hydraulic horizontal miter band saw automatic

JAESPA Concept 251 GA

Condition: used, empty load weight: 9,800 kg, maximum load weight: 37,700 kg, overall weight: 47,500 kg, axle configuration: 2 axles, first registration: 09/1999, loading space length: 12,600 mm, loading space width: 2,550 mm, loading space height: 500 mm, suspension: air, tire size: 245.70 r 17.5, color: traffic orange, Year of construction: 1999, Equipment: ABS, nooteboom cradle trailer, 2 axles with air suspension, ebs, 2 tridec steering axles from fifth wheel and adjustable by linkage, lower part 6.0m long x 50cm high from ground, adjustable and releasable neck, payload capacity up to 47.5 tons, year 1999, INTERDRIVE SRL-PARMA CINCESSIONARY Fsdpfepdqvlsx Ah Uspp

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm Fodpfxod Iip Se Ah Uepp cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with Fodpfsfg E Hnex Ah Uspp a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: good (used), Year of construction: 2014, Metal band saw, band saw machine, band saw, miter band saw machine Fpedpfjwtly Nox Ah Usp -Manufacturer: MEP, miter band saw for cuts from 45° right to 60° left -Type: Shark 332 CCS -Drive: 1.8 kW -Cutting data flat: 90° 330 x 270 mm / 45° 270 x 200 mm -Cutting data round: 90°45° 300 mm/260 mm -Cutting height: max. 300 mm -Cutting width: max. 270 mm -Saw blade speed: adjustable, 20 - 90 m/min -Saw blade: 3320x27x 0.9mm -Coolant system -Dimensions: 2070/1190/H1620 mm -Total weight: 697 kg

Year of construction: 2024, condition: new, The mini pallet shredder is ideal for shredding small and/or dismantled pallets. Fodpfx Aopahwvsh Ujpp

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2500 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. Fedpfemrnk Eex Ah Uepp The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, Year of construction: 2015, YAFTL2007F0017329 Fpsdpfx Ajrywukoh Usp = More information = Empty weight: 13,600 kg Payload: 28,400 kg GVW: 42,000 kg Extendable body: Yes Technical condition: very good Visual condition: very good Damage: none Contact Sales for more information. = Company information = If you have any questions or suggestions, Don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m Fpsdpfx Ahsfv Atts Ujp

Condition: new, axle configuration: > 3 axles, first registration: 03/2023, loading space length: 16,160 mm, loading space width: 2,550 mm, loading space height: 3,770 mm, total length: 16,160 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245 / 70 R17.5, wheelbase: 1,410 mm, color: red, Year of construction: 2022, Equipment: tail-lift, Color: Red Loading capacity: 55,200 kg Loading floor height: 89 cm Extendable Manufacturer: Goldhofer Model: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year: 2022 – New/Unused Weights: King pin load: 18,500 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross vehicle weight (GVW): 66,500 kg Unladen weight: 11,300 kg Payload: 55,200 kg Dimensions: Length: 13,020 mm Extension: 3,140 mm Max length extended: 16,160 mm Loading floor width: 2,550 mm / 3,000 mm Loading floor height: 855 mm / 895 mm (+100 mm / -100 mm adjustment) Height: 3,755 mm King pin height: 1,300 mm Axles: Axle make: BPW Eco Plus Fpodpfx Aeuu Hgdjh Ujp Air suspension 1st axle liftable Axles 1 & 2: rigid Axles 3 & 4: friction-steered High/Low valve ABS Tyres: 245/70 R17.5 dual mounted Load index: 143/141J (146/146F) Additional features: - Radio remote-controlled loading ramps - Hydraulically operated loading ramps - Manual rear supports - Side extensions - Underrun protection - Wheel recesses - Wheel recess covers - 2.0'' king pin - Lashing rings - Stake pockets - Central lubrication - Oversize load marker boards - BPW landing gear - Toolboxes on the gooseneck = Further Information = Axle configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tires; lift axle; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Front axle 2: Twin tires; Max. axle load: 12,000 kg; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; left outer: 100%; right inner: 100%; right outer: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functional Tail lift: Goldhofer Extendable chassis: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Damages: none Financial information Price: On request For further information, please contact Stefan Schaapveld.

Condition: used, Panel saw-milling machine Holzprofi FPSFM2000, good condition, 3 kW, 2200 mm table length, 100 mm cutting height, 2000 mm sliding table length, 500 kg Fpjdpfswzzgbex Ah Uop Price changes, errors, and printing mistakes reserved.