Fan

JFK AC 55 K

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Pgsdpfex Eh Iqox Af Ieg Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Year of construction: 1999 Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Psdsrn U H Hepfx Af Iegg Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Condition: used, Weinig brand moulder, model PFA17N, grooved table, 8 shafts (lower 4kw, right 4kw, left 5.5kw, right 4kw, upper 5kw, lower 4kw, universal 4kw, universal 4kw), used. Podpfx Aek N I I Njf Isgg

Condition: used, Year of construction: 2008, machine/vehicle number: VS8750, Printer CANON OCE Variostream 8750 with Prisma server (not in use - it is an old version) Pgodpovu Rimjfx Af Isg SRA4 Controller; IPDS; TCP/IP Prisma Server for Oce Printer VS 8750 (Prisma server HP Proliant ML-370-G4. Can operate two printer sets. Two duplex equals four simplex). MRM Standard (240/300 dpi or automatic 600 dpi resolution) WT4 Cross Turning Unit Printer 1 SN 88.136 Counter: 576,660,937 – Developer station replaced at 421,061,210 Printer 2 SN 88.137 Counter: 790,048,906 – Developer station replaced at 638,027,916 Year of manufacture: 25.09.2008 I-Configuration (printers) Type: C-Twin Fully operational. Additional: single CANON OCE Variostream 8750 – incomplete, for spare parts only. Included with the printing line are the following parts (may be less, as the machine is in ongoing use): - Developer KK01-D15 – 1 pcs - Corotron S29312-F645 – 2 packs (8 pcs/pack) - Cleaning Brush S29312-F1440 – 2 pcs - Fine Filter S26312-F1071 – 2 pcs - Fuser Oil S26312-F646 – 2 pcs - Heating Lamp S29312-F1488 – 2 pcs - Toner KK01-D25 – 6 packs (3 pcs/pack) - Drum S29312-F1463-V2 – 2 pcs - Bushing 2002025921 – 2 pcs - Pressure Roller (hard) S29312-F1270 – 1 pcs Included: Hunkeler Unwinder UW6 – S/N: UW6 7183.00835-01/08; year 2013 Hunkeler Rewinder RW6 – S/N: RW6 7182.00432-01/31; year 2013

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm Podpfx Afjl I Dx Nj Ijgg new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Podpfx Aowp R Eijf Iegg Vacuum raster table Edge milling unit along X-axis Year of manufacture: 2011

Condition: used, Bacci TSDCSF Automatic double rounding tenoning machine. Minimum piece length: mm. 150 Maximum piece length: mm. 2200 Poderkcr Uepfx Af Iogg Pieces per minute: 12,5

Condition: used, Machine: screw conveyor, screw conveyor, hollow screw conveyor Length: 8.10 m Ø screw: 500 mm Pgsdpfx Aorn T Ursf Isg Manufacturer: IEM Fördertechnik Type: Solid body screw conveyor, supported on both sides, without motor

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, input voltage: 400 V, total length: 6,000 mm, total width: 1,260 mm, total height: 2,130 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 2,500 kg, input current: 32 A, conveyor belt width: 550 mm, warranty duration: 12 months, roll width: 500 mm, 1. very precise fully automatic screen printing machine, which positions the motif with an accuracy of 0.03 - 0.05mm to the material. The integrated sensor recognizes the edge or print mark and positions the screen with an accuracy of 0.02mm to the sheet or print mark. It prints from roll to roll with unwinder + rewinder. UV drying and hot air drying up to 160 degrees Celsius are integrated 2. welded steel frame and very dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life Pgodpfxsqu R Sko Af Ieg 5. an integrated, electronically controlled pneumatic squeegee pressure compensation (option), which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material.

Condition: used, Machine: Screw conveyor, hollow screw Type: Hollow screw conveyor, supported on both sides Length: 9.60 m Ø auger: 350 mm Item no. 2024-1302-1 Pgodpfxjrmix Tj Af Iog