Jig grinding machine

Jones & Shipman 540 Precision Surface Grinder

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unilog 4000 Hedpfx Ajg Emvhsqrjp Closing force 60 tons Year of manufacture 1997 Screw diameter 30 mm Shot weight approximately 90 g

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Hodpfx Aqjwb Hygsrep Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm Hsdpfsu S Izcjx Aqrop measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: ready for operation (used), Year of construction: 1988, grinding length: 457 mm, grinding width: 154 mm, Heidenhain visual unit dresser Optidress Facstor Travels 457x154 mm Magnetic chuck 350x150 mm Grinding wheel guards Hjdeyh N Tlopfx Aqrsp

Year of construction: 1979, condition: ready for operation (used), Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible. Hodpfxoyln Dts Aqrjp

Condition: used, Year of construction: 2000, functionality: fully functional, Compact resistance butt welding machine from IDEAL-Werk (C.+E. Jungeblodt GmbH, Lippstadt, Germany) for joining band saw blades quickly and reliably. The BAS 050-11 is the entry-level workhorse of the BAS series — ideal for workshops, saw doctors, and sawmills that weld narrower carbon and bi-metal blades and need a dependable, low-footprint machine. Built to the usual IDEAL standard: solid German engineering, simple operation, and the kind of longevity that keeps these machines in daily service decades after they leave the factory. Technical Specifications Type: BAS 050-11 Year of manufacture: 2000 Rated output at 50% ED: 4.5 kVA Connected load: 4.5 kVA Open-circuit (welding) voltage: 2.6 / 4.4 V Max. upsetting force: 2.2 kN Primary voltage: 415 V Frequency: 50–60 Hz Fuse protection: 16 A CE marked — Made in Germany Hjdpfx Ajzcqn Noqrep Resistance butt welding for clean, strong blade joints Two-stage welding voltage (2.6 / 4.4 V) for flexibility across blade types Compact and robust — built for continuous shop use Steel strip: 6-50 mm Bandsaw for wood: 6-50 mm Metal bandsaw, bimetallic and tungsten alloys: 6-32 mm Hoop knife: 6-30 mm Stainless steel bandsaw: 6-30 mm

Condition: excellent (used), grinding diameter 155 mm grinding length 400 mm centre height 80 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : STUDER (CH) Universal Precision Cylindrical Grinding Machine Model S 20-12 Year Height of centers / Grinding Ø 80 / 160 mm Hsdpezbczxofx Aqrep Center distance / Grinding length Z-axis 400 / 420 mm Internal Grinding Ø mm Workpiece weight flying / between centers max. 5 / 20 kg Table speeds 0,1 – 3,5 m/min Table way automatic, min. 1 mm Table swivable max. 30 ° Universal Grinding Head cross way max 170 mm Rapid infeed way 30 mm Infeed way 1,9 mm Feeds 0,001 – 0,04 mm/Ø Swivable 10 / 30 ° Grinding wheel dimension : bore x width x Æ 127 x 30 x 300 mm Internal Grinding device separately mounted mm Workhead Fitting taper/conus MK 2 Speeds 60 – 1.200 rpm Spindle drive 2,2 kW Total electric load approx.. 5 kW - 400 V – 50 Hz Weight approx. 1.000 kg Accessories / Special Features: • Electrohydraulic conventional control with PHILIPS Digital Readout for the infeed (x-axis) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out • Separately mounted Internal Grinding Device with belt-driven internal grinding spindle • Workhead with Quck-release collet chuck, swivable 90° • (right now the machine is not equipped with a tailstock, an original STUDER tailstock; used can be supplied for approx.. EUR 5.000,--) • Wet grinding equipment with coolant filtration unit, separate electric cabinet, manuals Condition : Very good ! Universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, before loading

Condition: refurbished (used), functionality: fully functional, grinding length: 680 mm, grinding width: 350 mm, grinding height: 300 mm, table length: 600 mm, table width: 300 mm, grinding wheel width: 50 mm, spindle speed (max.): 1,400 rpm, CAPACITY Max. longitudinal table travel: mm 680 Max. cross travel of grinding wheel: mm 300 Max. grinding width: mm 350 Max. grinding height with standard wheel: mm 300 TABLE Table surface dimensions: mm 600 x 300 Length of T-slots: mm 850 Size and center distance of the three T-slots: mm 16 x 100 Continuously variable speed: m/min 2 – 30 GRINDING WHEEL Standard dimensions (diameter x bore): mm 356 x 127 Standard width: mm 50 Max. permissible width: mm 76 Max. external diameter – upon request: mm 406 Speed with 50 Hz motor: rpm 1,400 Incremental cross feeds: mm 1 – 10 Continuously variable cross movements: m/min 0.1 – 6 Automatic vertical feeds – upon request: mm/min 0.005 – 0.05 MOTORS, three-phase AC – 50 Hz: Grinding wheel rotation, 4 poles: kW (HP) 5.5 (7.5) Hydraulic unit, 2 poles: kW 2.2 (3) Rapid vertical movements, 4 poles – upon request: kW 0.37 (0.5) Hodpfx Aqeymlcvsrsp Coolant unit, 2 poles: kW 0.22 (0.3) MISCELLANEOUS Overall floor dimensions, machine in operation: mm 2780 x 1240 Height from floor, standard machine: mm 1960 Machine height with raised column – upon request: mm 2110 Approx. net weight: kg 2,500

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 457 mm, travel distance Y-axis: 171 mm, travel distance Z-axis: 504 mm, spindle speed (max.): 2,640 rpm, Equipment: CE marking, documentation/manual, Tangential Surface Grinder J.S 540 X Workable Surface Area: 457 x 152 mm Vertical Travel: 504 mm Standard Grinding Wheel Size: 200x20x31.75 mm Grinding Wheel Speed: 2640 RPM Operation and Maintenance Manuals CE Declaration Tank with Paper Filtration Hjdjyuwvkjpfx Aqrjp

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench Hsdjxf Ez Uopfx Aqrjp - Grinding wheel balancing stand - Set of levelling elements - Oil filling