Relief grinding machine

JUNG HA 20

Condition: used, Rear grinding machine with permanent magnet clamping plate, JUNG, type HA 20 Device no.: 3344 Profile depth: max. 15 mm Angle setting: 0° to 2° Magnet plate: 115 x 115 mm Clamping range: 110 x 75 mm Height of magnet plate: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Power consumption: 1 ampere Operating voltage: 24 volts, direct current (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Dwedpfx Aodz Sqxjarod In good condition Suitable for use in cutting tool mold making for conically rear-ground cutting plates or mold inserts.

Year of construction: 1984, condition: used, Large grinding wheel diameter: 40 mm Dwsdjcq Rv Ujpfx Aarod Small grinding wheel diameter: 5 mm Weight: 0.9 t 2 grinding wheels with flange 8 collets 1 coolant tank Mechanical feed with fixed stop The universal joint for the workpiece drive is worn.

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.15 m Tilted height min. 0.45 m, max. 0.95 m Speed approx. 0.01 - 1.3 RPM, digital display Tilting up to 135° Dsdpfxjdpuapj Aarswd Hand and foot remote control with speed display Very robust This rotary table is also available in stock with 1000 kg and 3000 kg load capacity.

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Type: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Maximum workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Dwsdswp E Rgspfx Aarsd Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Rotational speed: 4,200 rpm Machine weight: approx. 2,500 kg 31126ä

Condition: good (used), Year of construction: 1978, turning diameter over cross slide: 430 mm, spindle bore: 82 mm, turning diameter: 640 mm, center height: 320 mm, center width: 3,000 mm, quill stroke: 250 mm, total length: 5,600 mm, total width: 1,300 mm, total height: 1,900 mm, swing diameter over cross slide: 430 mm, bed width: 430 mm, Turning diameter in gap: 850 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 9 rpm, Conventional lathe, center high 320 mm, between centers 3000 mm, bore Ø 82 mm, 27 speeds 9 - 1800 rpm, motor 18,5 kw, nose DIN', dimensions 560x130x190 cm, weight ca. 5000 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck FORKART Ø 400 mm, tool post RAPID with toolholders, steady and following rest with roller pin Dwjdpfx Ajzin Nioared

Year of construction: 1963, condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Dwedponccx Hsfx Aarod

Year of construction: 2021, condition: like new (used), Mobile 3D coordinate measuring machine Djdpfx Aajmrrb Serswd Keyence WM-3000 Like new machine, sold because of new purchase Technical data available at manufacturers website Visit possible in 47877, Willich GERMANY

Year of construction: 1984, condition: used, machine/vehicle number: 57051/4, Manufacturer: Rhode & Doerrenberg (May) Model: SS 40 U Serial No.: 57051/4 Year of Manufacture: 1984 Weight: 950 kg General / Technical Data: Used drill grinding machine from German production for 2, 3, and 4-edged tools, in good condition. Diameter range: 5 mm to 40 mm Tool length: 500 mm Point angle: 80° to 160° Clearance angle: 1° 30“ to 10° Grinding wheel: 210 x 127 x 50 mm (cup wheel) Tool body: 2, 3, and 4-edged drills and countersinks Grinding direction: Left and right-hand cutting tools Machine dimensions (l x w x h): 1350 mm x 1100 mm x 1400 mm Power connection / Control voltage: 380 V 50 Hz / 220 V Motor power / Total power: 2.2 kW / 2.55 kW Accessories / Special equipment: • 2 grinding wheel holders with grinding wheel • 8 collets for drill chuck, manufacturer Forkardt • 6 MK tool holders & drill extensions Dwsdoc Nv S Aepfx Aarjd • Coolant system • Machine documentation & electrical wiring diagram Remarks: The machine is located in our warehouse, connected to power, and can be demonstrated by appointment.

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,500 mm, grinding diameter: 400 mm, Technical data - grinding length [mm] - 1500 - grinding diameter [mm] - 400 - range of table speed [mm/min] - 0 - 10 - smallest table travel [mm] - 0,001 - taper in tailstock sleeve {Morse no.] - 5 - grinding wheel dimensions [mm] - 500x80x203 - power of grinding wheel drive motor [kW] - 11 - power of grinding wheel drive motor [kW] - 3,5 - overall dimensions [mm]: length - 6650 width - 2300 (without desktop) height - 1800 - weight of machine tool [kG] - 6900 Dwodpfxjvga Ays Aarod - central lubrication system; - Mitsubishi control system; - movement of the grinding wheel headstock - application of ball screw and servo motor; - table travel - use of ball screw and servo motor; - headstock of the workpiece - use of a new motor along with stepless speed control controlled from the operator panel; - "electronic wheel" for precise raids in both servo X and Z axes, e.g., for set-up work; We also make machines with Siemens 828D or 840Dsl control. It is possible to make machines up to a grinding length of 2000 / 2500 / 3000 mm.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort Dedpfx Asvppxpjarswd