Edge sanding machine

Kündig Uniq

Condition: new, Year of construction: 2026, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available - Kdedpfx Akjvk R Are Aor

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Kdedpfsqlckpex Ak Aor Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations Kjdpfx Asfig Rwek Aodr 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. Kdjdehqb Rcjpfx Ak Aer 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, Second-hand machine Year of manufacture: 2013 Features and technical specifications: - clearly laid-out controls - ideal working height - large opening - Full access on all four sides - Push-button control - Stop button - Safety cable - Emergency stop at every point - Timer with audible signal - Automatic pressure switch - automatic temperature control system - infinitely variable stroke limitation - heavy-duty rack-and-pinion compensation - Energy-saving circuit as standard - side cylinders can be deactivated - Total pressing force: 120 tonnes - Panel dimensions: 3000 x 1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening / stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 mins - Maximum permissible operating temperature: 140 °C - Total power rating: 20.1 kW - Hydraulic power: 1.21 kW Ksdpfozk N Shjx Ak Ajdr - Fuse rating: 35 A - Dimensions: 3500 x 1610 x 2000 mm - Total weight: 6,200 kg Availability: at short notice Location: 63934 Röllbach

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Features and technical data: - Double-sided operation with surface and contact grinding sides - Abrasive belt size: 200 x 2000 mm - Belt drive motor: 3 kW - Programmable oscillation stroke: 10–90 mm - Grinding unit motorized tilting up to 45 degrees - CE-compliant / Dust-tested Accessories: Semicircular table at the belt drive roller Kdsdpfoxvnmnex Ak Aor Dimensions (LxWxH): 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Availability: short-term

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Spindle Power: Bottom spindle: 4 kW Right spindle: 7.5 kW Left spindle: 7.5 kW Top spindle: 7.5 kW Bottom spindle: 4 kW Universal spindle: 4 kW Planing width: 220 mm Planing height: 120 mm Max. spindle speed: 6,000 rpm Spindle diameter: 40 mm Feed rate max.: 22 m/min (infinitely variable) Feed motor: 3 kW Main motor: 7.5 kW Kdsdoyybdwepfx Ak Ajr Pneumatic top pressure Feed via cardan drive Motorized adjustment (planing width and height) Infeed table length: 2,000 mm Integrated lubricant pump

Condition: used, Year of construction: 1992, Machine cleaned, function tested, partially overhauled. Spindle runout extremely precise, maximum 1/100 mm. Pneumatic hoses, filter pressure regulator, and mist lubricator replaced. Test run carried out. Used machine, excellent condition, premium features with plunge spindle. With this milling machine, both entry and exit milling operations can be performed. This means the milling spindle can be pneumatically controlled to plunge in and out via a table operated by adjustable limit switches. Manufacturer: Hofmann Model: TFS 1200 Year of manufacture: 1992 Machine no.: P127-92-222-723 Motor: 5.0 / 6.2 kW (reinforced) Swivelling range: -5° to +45° Motor brake Motor: 2 speeds, pole-changeable 6 speed levels: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward/reverse rotation Table size: 2,000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Digital displays for milling fence, diameter, and cutting depth Electric height adjustment Electric swivel adjustment Digital displays for swivel angle and spindle height Extraction connection: 2 x 120 mm diameter Required space: approx. 2,000 x 1,600 x 1,400 mm Weight: approx. 1,000 kg Ksdpey Ay Dzofx Ak Aedr Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, function tested without overhaul, without warranty or guarantee