Cold Circular Sawing - Automatic

KALTENBACH MSK 400

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine KALTENBACH Type : MSK 400 Year 1976 with roller table. Ijdpfx Aeqxamgsb Tetd Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Iodpfx Aswlt Rasb Totd Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)

Condition: ready for operation (used), functionality: fully functional, For sale: Hans Kaltenbach MSK 400 saw. Ijdpfx Ajxxu T Hjb Tetd

Condition: good (used), Semi-automatic cold circular sawing machine with roller table. Itsdpjq U N Ryofx Ab Ted

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays Ijdpfx Aeucqqusb Tjtd - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Iodpfx Aowbhq Heb Tetd Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2004, Control Siemens Sinumerik 840D Bar capacity 65 mm Speed 5,000 min-1 2 x 12-way turret with driven tool Ijdpfx Abswh U D Ho Tstd Turret 1 with Y-axis Part collection device Belt filter system Chip conveyor Bar loading magazine IRCO Profimat

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS Travel X / Y / Z: 1,250 / 880 / 800 mm Control: Heidenhain Spindle speed: 10,000 rpm B-axis: automatic Number of tool changer stations: 60 Tool holder: SK-50 Number of pallets: 2 pcs Pallet dimensions: 1,000 x 800 mm Itjdjxdnclopfx Ab Ted MACHINE DETAILS Operating time: 59,112 h Spindle hours: 21,619 h Machine transport dimensions: 5.5 x 3.0 x 3.1 m; 14.3 t EQUIPMENT - electronic handwheel - MillPlus 3D contouring control - Central spindle air blast - Measuring probe - Rinse gun - Documentation - Chip conveyor (hinged belt) - Coolant system - Oil mist extraction

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe Itedpfsh Uuzyex Ab Tod -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Iedpfx Ajx N A I Nob Totd Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders