KAOMING KMC-2000 SV

KAOMING KMC-2000 SV

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Y-axis travel: 1,400 mm Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Tool holder: SK50 Tool magazine capacity: 40 positions Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Gujdpjy Dgy Esfx Aihoh Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Chip flushing Chip conveyor

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar Gujdsu Nc Rispfx Aiheh dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: good (used), Year of construction: 2008, turning length: 12,000 mm, spindle motor power: 60,000 W, total height: 3,800 mm, total length: 23,000 mm, total width: 7,600 mm, swing diameter over cross slide: 1,520 mm, turning diameter over bed slide: 1,140 mm, workpiece weight (max.): 20,000 kg, overall weight: 58,000 kg, Equipment: documentation/manual, CNC Lathe Giuseppe Giana - GGH 1100/760 x 12.000 CNC MACH-ID 9439 Make: Giuseppe Giana Type: GGH 1100/760 x 12.000 CNC Control: Siemens 840 D-SL Year: 2008 3 bed way construction Gujdpfx Ajyl Uh Ssiheh Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 155mm Spindle power: 60kW Bed width: 1100mm Tailstock spindle Ø: 310Ø Stroke pinole: 300mm Spindle taper: 1:4 taperMk Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Height: 3800mm Weight: 58000kg

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel Gedpfx Aisxdiigehouh - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: Guodporg Htpefx Aihjh 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: excellent (used), Year of construction: 2003, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 4,000 rpm, table width: 1,200 mm, table load: 4,000 kg, table length: 3,860 mm, mount diameter: 50 mm, total height: 3,640 mm, total width: 4,500 mm, total length: 8,900 mm, rotational speed (max.): 4,000 rpm, workpiece weight (max.): 4,000 kg, overall weight: 24,000 kg, FIBRO indexing rotary table 800 mm Closed covered machine with doors for easy acces Indexing head 2.5 x 2.5 Degrees Automatic lubrication Double chain chip conveyor Under power 1e owner machine X - Travel: 3500mm Y - Travel: 1200mm Z - Travel: 1400mm Table Length: 3860mm Table Width: 1200mm Table load: 4000 Table Ø: 800mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 50ISO/Bt/Mk Gujdpfxozl Afdj Aiheh Power on spindle: 30kW Speeds / ranges: 4000Rpm ATC / revolver: 30 Number of controlled axis:3 + 1 Chip conveyor: Yes Coolantsystem: Yes Length: 8900mm Width: 4500mm Height: 3640mm Weight: 24000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), 1 used, very well-preserved universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal coolant supply through the spindle, and hydraulic tool clamping Manufacturer: CME, Origin Spain Model: FS Spindle mounting: DIN 69871 AD, ISO 50 Maximum speed range: up to 4,000 rpm Maximum drive power: 22/30 kW Gujdpfxeyf Uqtj Aihsh Weight: approx. 300 kg This high-quality milling head was used as a loaner milling head and was only put into operation for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. Includes installation & commissioning! KEY TECHNICAL DATA Machine year of manufacture: 2016 Capacities / Travel: Longitudinal (X): mm 3,000 Vertical (Y): mm 2,000 Lateral (Z): mm 1,500 Clamping surface, NC rotary table: Swivel table: mm 1600 x 1400 Transport load: kg 15,000 Positioning accuracy: arc/sec ±2.5 Paint finish: graphite gray RAL 7024 / agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power (from 376 rpm): kW 40 Spindle speed range: Spindle speed: min-1 0 - 3,000 Torque: Nm 1,360 Speed control: Gjdpfxszux Awe Aiheuh 3-stage (oil-cooled) with automatic switching Connection power: kVA approx. 53 Feeds: Working feed max.: X, Y and Z axis mm/min 15,000 Max. Rapid traverse speed: X, Y and Z axis mm/min 25,000 Space requirement Length approx. mm 8,500 Height approx. (without tool changer) mm 4,200 Width approx. mm 5,600 Weight: kg approx. 29,200 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head Diagonal Automatic tool changer Chip conveyor Coolant system with 50 bar & (IKZ) Full enclosure for working area (closed at the top) Extraction system for the aforementioned full enclosure Special operating mode RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and faults were professionally repaired by our skilled service team.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Gedpfx Aisy Thxzehjuh Chip conveyor, Electr. handwheel, Dynamics package, Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Gujdjyybpmjpfx Aihoh Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000