Offset printing press

KBA 104 5P

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, RMGT 790ST-4 Year 2016 4 colors SAPC, Matic, paper size preset, S type, size 600x788 mm, all wash-ups, chromed impression cylinders. Nwjdpfx Aoyyw Tnokcof

Condition: excellent (used), Year of construction: 2004, operating hours: 18,990,620 h, functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 360 mm, type of input current: three-phase, Equipment: documentation/manual, The machine is with console and are also a two-way print. Nwsdpfx Akewa Ulzjcjf

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Nsdpfx Akjx U A D Uecjwf Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. Nwjdpfx Asuf Sy Aokcsf 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: good (used), Size: max 320 x 260 x 40 mm min 150 x 100 x 2 mm Book block thickness: max 40 mm Nwedpsgbxl Uofx Akcof min 2 mm Cover size: max 560 x 325 mm min 202 x 150 mm Speed: max 5.000 c/h Power requirements 24 kW (220/380V, 50Hz) Length 7.543 mm Width 2.400 mm Equipment gathering machine: chain tensioner with hand fed 20 stations missing sheet and double sheet control perfect binder 18 clamps milling and roughening unit hotmelt spine and side gluing unit pile cover feeder cover pressing station lay down device standards 1 set of operator manuals standard equipment information: condition: very nice machine in good working condition

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Bobst Mistral 110 HHS 4 glue nossels Prefold 1/3 Straight line Crash lock 4 points glue 6 points glue Max speed 400 meter per minute Till 800 gsm carton , N, F and E Max format 1100 x 800 mm Min format 126 x 60 mm Nwodpsym A Hxefx Akcjf

Condition: used, Year of construction: 1988, machine/vehicle number: 1743, UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nwjdpfx Ajh Axquskcsf Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 30996 B, MAN ROLAND R906-6 LTTL Year 2004 Machine no. 30996 B Total impressions: approx. 405 million Sheet-fed offset press – 6 printing units + 2 varnish coating units + 2 tower dryer units 5 units with conventional inking rollers + 1 unit with hybrid rollers High-pile feeder and extended delivery Technical specifications: - Printing speed: 13,000 sheets/h - Max. sheet size: 1020 x 1420 mm - Min. sheet size: 600 x 850 mm - Stock thickness: 0.2–1 mm - Max. print area: 990 x 1400 mm - Plate size: 1165 x 1430 mm; plate thickness: 0.30 mm - Blanket size: 0000 x 0000 mm; blanket thickness: 1.90 mm - Dimensions (L x W x H): approx. 25.00 x 4.70 x 2.70 m - Power requirement: approx. 00 kW - Weight: approx. 140,000 kg Accessories and features included: - Non-stop feeder - Steel feed table - Stream feeder with vacuum belt - Preset system (automatic paper size and thickness adjustment) - Electronic double sheet detection - Electromechanical double sheet detection - Electronic side lay control (photoelectric and acoustic) - Antistatic devices at feeder and delivery - RCI machine control and diagnostics via monitor console: self-diagnosis, control and monitor console; remote ink and dampening control; axial, circumferential and diagonal register control with light pen; daylight lamp and memory card for job storage - Multi CCI 2D quality control - APL™ fully automatic plate changer - Remote-controlled circumferential, lateral and diagonal register - Rolandmatic continuous dampening system with alcohol dosing, cooling and Technotrans Beta D recirculation unit - Ink temperature control - Programmable automatic blanket wash - Programmable automatic roller wash - 570 mm raised height - Chromed cylinders - AIRGLIDE sheet transport - Anilox UV coating unit with varnish pump - 2 hot air drying towers between coating units - Anilox conventional coating unit with varnish pump - Automatic sheet de-curler - Grafix Cantronic 3000 powder spray - IR ELTOSCH dryer - UV ELTOSCH dryer with 3 lamps - Extended delivery - Steel delivery table - Non-stop feeder - Tools, documentation - Supplied with all standard parts and accessories Availability: Immediate Nodpjygdl Nefx Akcjwf Condition: Good working order, no damage to cylinders or gears Inspection: Machine is in production, test runs possible Video available

Condition: new, ML-1400 NXL die cutter Nwjdpfswq Dwzsx Akcef The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter Nsdpfeqqkvqjx Akcswf - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions - Electrical circuit diagrams - Standard tools - Standard accessories