DRIVE

KEB

Condition: used, KEB 52 kVA, AC motor 37 kW, Art. No. 20F4F3R-4R01, frequency inverter 0..10000 RPM 52 kVA, AC motor 37 kW 2/4 pole 50/60 Hz Csdpfx Akjd A Ndqsteri Art. No. 20F4F3R-4R01 Frequency inverter 0..10000 RPM International shipping available upon request!

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. Cedpsy Ehrxofx Akteri SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: not inspected (used), functionality: unexamined, KEB frequency inverter with potentiometer KEB F5 15F5A1E-350A Input: AC 3-phase 50/60 Hz 400V 31.2A UL: 480V 27.3A Output: AC 3-phase 0…599Hz 0…Uin 24A UL: 21A 17kVA Crjdszkay Ajpfx Aktsi

Condition: ready for operation (used), LAIPPLE / KEB M63L / 4a-SO, serial number: L113063970025005, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Crodpji D I D Njfx Aktsi

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Crodox Ebzdopfx Aktoi Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: used, functionality: unexamined, overall weight: 5 kg, total length: 260 mm, total width: 360 mm, total height: 210 mm, Ferwood Code: RU0009049 - Manufacturer Code: 4-008-39-1470 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a refurbishment service, please contact us. Crodpfx Ajz Izhaektei

Condition: used, KEB 104 kVA, AC motor 75 kW, Art. No. 23.F4.F1U-4R01, frequency inverter 0-1600 Hz EMC filter 180A, Crjdpfx Asd A Ndfektei 0...528V UL 480V 150A Ambient 3K3, Mat. No. 23E4T60-1001 Line H1R1A14 International shipping available upon request!

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Cedezuy N Eopfx Akteri Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 10E5T60-1001, KEB Automation EMC Filter, part no. 10E5T60-1001, is an advanced passive component from the COMBILINE series, designed to eliminate high-frequency electromagnetic interference in drive systems. The device is specifically dedicated for use with KEB COMBIVERT F5 series inverters (housing sizes F4 and F5). Technical Specification: - Rated Voltage (UL): 480V AC - Max. Input Voltage: 3-phase, up to 528V AC - Rated Current (UL): 6.7 A - Rated Current (nominal): 8.0 A - Mains Frequency: 50/60 Hz - Number of Phases: 3 phases + PE - Operating Temperature Range: up to 45°C (Class 3K3) - Protection Degree: IP20 Key Functions and Application: - Interference Suppression: The filter effectively blocks conducted radio frequency interference (RFI/EMI) in the range of 150 kHz to 30 MHz. Csdpsy Dqbmjfx Aktjri - Mains and Device Protection: Prevents harmonics generated by high-speed IGBT switching in inverters from entering the power grid, protecting sensitive electronic equipment. - Standard Compliance: Helps meet EMC requirements according to EN 61800-3 for categories C1 and C2. - Mounting: Designed for control cabinet installation, often on a 35 mm DIN rail.

Condition: good (used), machine/vehicle number: 10F5C1B-2A0A, The KEB COMBIVERT F5 frequency inverter is designed for controlling electric motors in industrial applications. The device belongs to the universal F5 series, widely used in machinery and production lines requiring precise speed and torque control. The F5 series is commonly used in industrial automation and supports both asynchronous motors and synchronous servo drives. It features a modular design, high configuration flexibility, and the ability to operate in demanding industrial environments. - Model: 10F5C1B-2A0A - Series: COMBIVERT F5 (Compact version) - Serial number: 301211195 - Production date: 2010-05 - Country of origin: Germany Input (Supply): - 1-phase / 3-phase: 200–230 V AC - Frequency: 50/60 Hz - Input current: 20/14 A (at 230 V) - UL rating: up to 240 V / 20 A Output (Motor): - 3-phase AC output - Output current: up to 10 A - UL rating: 9.6 A Crodpsyzpzgefx Aktoi - Frequency range: 0–800 Hz Power: - Apparent power: 4.0 kVA - Motor rating: 2.2 kW (2/4 pole motors) The F5 inverter offers: - precise speed and torque control - scalar (U/f) and vector control modes - encoder and sensorless operation capability - integrated functions: * DC braking * PID controller * parameter management (up to 8 parameter sets) * motor protection functions - support for industrial communication interfaces (e.g., Modbus, Profibus, EtherCAT – depending on version) Construction and Visible Components: - control panel with START / STOP / ENTER / FUNC keys - communication port (RJ45, e.g., for operator panel or diagnostics) - connectors labeled X6B, X6C, X6D (communication or I/O interfaces) - terminal strip for control signals and power connections - compact enclosure for installation in a control cabinet (housing size “B”) This type of inverter is used in: - CNC machines and woodworking machinery - production and conveyor lines - pumps and fans - applications requiring variable speed motor control Due to the wide output frequency range (up to 800 Hz), it is also suitable for high-speed drive applications.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Condition: ready for operation Csdpfjx Nw Drex Aktsri Machine type: machining center If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: used, functionality: unexamined, overall weight: 7 kg, Ferwood code: RU0011395 - Manufacturer code: 10.F5.CBB-YM00 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service, please contact us. 7 KG - 46x39x27 Cedpfeyk Dzrex Aktori

Condition: like new (used), functionality: fully functional, Ferwood Code: R19000420 - Manufacturer Code: 16.F5.GBG-YA00 - Condition: As new (showroom item) - Functionality: Fully operational - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 8.5KG - 46X39X27 Cjdpoyk D Hnsfx Aktsri

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm Crsdpfx Akezuyl Totei - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, functionality: unexamined, Ferwood Code: RU0009286 - Manufacturer Code: 10.F4.S1D-4A00 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Cedpfx Akswnpk Istori