Suction attachment

Keller Lufttechnik UNI-STAR X-SL

Condition: used, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Nwsdpfxexmhhao Ag Ijc Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] Njdsug U Dgjpfx Ag Iswc - Remaining work thickness : approx. 5 [mm] EQUIPMENT - same as on photos

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Nodpounh Uvjfx Ag Iewc Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg Nedpfx Aomhhx Isg Iewc - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Nedpfx Agoicic Hj Iewc Very good condition

Condition: used, Technical details: material width: 400 mm material thickness: 2 mm Number of Straightening rolls: oben/upper/arriba: 5x Number of Straightening rolls: unten/lower/abjo: 6x roll width: 410 mm throughput speed: 9-20 m/min total power requirement: 5,5 kW Weight approx.: 1,3 t Nwodju Ic Dyspfx Ag Ioc space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and guidance waggon - 2 intake limits / output limits This straightening machine must be electrically integrated by the customer! *

Condition: used, Year of construction: 1970, material width 200 mm material thickness 0,5 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm Nwodpsvzxm Hjfx Ag Ioc power requirement 3,1 kW weight 1,1 t dimensions (WxDxH) 1,5 x 1,2 x 1,9 m SPECIAL DEAL as is where is, WITHOUT electrical cabinet WITHOUT putting into operation / WITHOUT additional work free loaded to truck