KEYENCE IM-7030T

KEYENCE IM-7030T

Year of construction: 2018, condition: ready for operation (used), This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. • Controller: IM-7000 • Image pickup device: 1" 6.6 megapixel monochrome CMOS • Display: 10.4" LCD monitor (XGA 1024×768) • Light receiving lens: Double telecentric lens • Illumination system: Telecentric transmissive, top light, four-division multi-angle illumination (motorized), slit ring illumination (motorized) • Measurement modes: Wide-field, High-precision • Wide-field measurement area: 300 × 200 mm (quadangle R50) • High-precision measurement area: 225 × 125 mm • Minimum display unit: 0.1 µm • Measurement accuracy (wide-field, without stage move): ±1 µm • Measurement accuracy (high-precision, without stage move): ±0.5 µm • Measurement accuracy (wide-field, with stage move): ±2 µm • Measurement accuracy (high-precision, with stage move): ±1.5 µm • Linked measurement accuracy: ±(7 + 0.02L) µm (wide-field), ±(4 + 0.02L) µm (high-precision) • Measurable area (XY, stage): 90 × 90 mm • Maximum measurement depth: 30 mm • Light probe diameter: 3 mm • Measuring force: 0.015 N (light probe), 0.3 N (height measurement) • Repetition accuracy: ±2 µm • Measurement range (Z): 0–75 mm • Measuring position accuracy (XY): ±0.2 mm • Minimum display unit (height): 1 µm • Measurable area (XY) wide-field mode: 145 × 95 mm • Measurable area (XY) high-precision mode: 107.5 × 95 mm • XY stage: Motorized, movement range 200 × 100 mm, max load 5 kg • Z stage: Motorized, movement range 75 mm • External remote input: Non-voltage input (contact/solid-state) • External output: PhotoMOS, OK/NG/FAIL/MEAS, rated load 24 VDC, 0.5 A • Interface: LAN RJ-45 (10/100/1000BASE-T), USB 2.0 Series A (6 ports) • Record storage: HDD 500 GB • Ambient temperature: +10 to +35°C • Relative humidity: 20–80% RH (no condensation) • Pollution degree: 2 • Over-voltage category: II • Power supply voltage: 100–240 V, 50/60 Hz • Weight head: 31 kg Dwodpfx Aiex D E Npe Esd • Controller weight: ~8 kg

Condition: excellent (used), Year of construction: 2011, Technical data: Two-column design Cutting capacity: 700 x 520 mm Cutting diameter (round steel): max. 520 mm Cutting diameter (square steel): max. 520 x 520 mm Cutting diameter (rectangular steel): max. 520 x 520 mm CNC control: B&R PP 45 Hydraulic bundle clamping Hydraulic lowering Infinitely variable saw band speed Mobile control panel with digital display Saw blade dimensions: 6640 x 41 x 1.3 mm Cutting speed: 15 - 90 m/min Working height: 770 mm Motor power: 5.5 kW Dimensions (L x W x H): approx. 3500 x 3000 x 2500 mm Weight: approx. 5.0 t Accessories: 4 new saw blades Dwjdpfsxlcpvsx Ai Esd Condition: Almost as-new condition The seller is not liable for typographical or data transmission errors. The machine's visual appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical data shown on pictures. Dwsdpfx Aszk I R Aji Ejd

Condition: used, Year of construction: 2023, turning diameter 120 mm turning length 640 mm control Fanuc 32iT Djdoy Nfdmspfx Ai Eswd total power requirement 45 kW weight of the machine ca. 8,5 t

Year of construction: 2017, condition: excellent (used), Alicona InfiniteFocusXL200 G5 Measuring System Positioning Volume: 200 mm × 200 mm × 200 mm Maximum Workpiece Weight: 30 kg Objective Magnifications: 2.5x, 5x, 10xHX, 10x, 20xHX, 20x, 50x, 100x Numerical Aperture: 0.075–0.8 Working Distance: 4.5–37 mm Lateral Measuring Range: 5.63 mm to 0.16 mm Vertical Resolution: 2300 nm to 10 nm Measurement Noise: 800 nm to 1 nm Djdex Dxw Tjpfx Ai Ejwd Vertical Measuring Range: 8–36 mm Measuring Speed: up to 1.7 million measurement points/s Minimum Measurable Roughness Ra: 7 µm to 0.03 µm Minimum Measurable Roughness Sa: 3.5 µm to 0.015 µm Minimum Measurable Height: 2.3 µm to 0.01 µm Maximum Measurable Area: up to 40,000 mm² Flatness Accuracy: 0.1 µm (10x objective) No guarantee is given for the correctness, completeness, or up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2015, grinding length 500 mm grinding width 250 mm Dwedpfx Aisxy S Dxj Eed

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm Dwjdpew T Tlrsfx Ai Eod All technical details are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye - Interface for bar feeder - Automatic parts catcher - NC tailstock Dwjdpozv D H Rsfx Ai Ejd - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, The JCM-7000 combines simple sample navigation with a range of advanced automatic functions. A large sample chamber, high resolution, and an optional low vacuum mode for non-conductive samples make this desktop SEM a versatile, mobile all-rounder. Features: • SE/BSE detection • Magnification up to x100,000, resolution approx. 8 nm • Low vacuum operation for non-conductive samples Dsdpfx Aiezn Ih As Eswd • Hardware and software integrated EDX system for elemental characterization • Live elemental analysis, live imaging (including 3D imaging/topography) • Intuitive operation with recipes, automatic functions, image montages, etc. • Large chamber for samples up to 80 mm diameter and 50 mm height • Compact & mobile • Dimensions (Main Unit): 324 mm W x 586 mm D x 566 mm H

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Description (detailed specifications): o 5-axis stage o Modern, expandable user interface with EDX integration and image montage o SE detector o Scintillator-BSE detector o In-lens detector o Low-vacuum system with BSE detector o Fully software-integrated JEOL EDX system o In-column current measurement o Navigation camera o Live camera o Control panel o Desk, PC with Windows OS, 2 x 24" monitors, keyboard Dwedpfx Aiozn Ihps Esd