Conventional Milling Machine - SBF 40 TV 1000

Knuth SBF 40 TV 1000

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm Gbodpfxswgi Tmj Afnjh turning length / mm

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include infinitely variable speed control Godpfjh Rvxhsx Afnjbh Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Year of construction: 2015, condition: used, Dimensions (L/W/H) 700x655x1400 mm Gbjdpfxegr Rkxo Afneh Filter capacity / m² Number of filters 1 St. Number of dust containers 1 St. Weight 140 kg

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: Gbedem Rlb Nepfx Afnjh 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: used, Rotary vane vacuum pump Oil circulation lubricated Manufacturer: Busch Type: RC 1000 B Status: Refurbished Warranty: 12 months Suction capacity: ca.1000m³/h Ultimate pressure: approx. 20 mbar Gsdpfxscu Tiro Afnobh Operating medium: Mineral oil (Inclusive) Delivery time: 2 Wo.

Condition: new, ELMAG gearbox milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, you can cover a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Tapered arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 20 mm Tapping capacity M14 Milling capacity face milling cutter 63 mm Milling capacity end mill 16 mm Spindle holder (turning spindle) MK 2 Speed range 1 50 - 1125 rpm Speed range 2 100 - 2250 rpm Infinitely variable speed steps Quill stroke 50 mm T-slots, width 12 mm Milling head stroke 375 mm Spindle projection 184 mm Milling head swivel range ± 90 ° Quill distance table 0 - 375 mm Milling table surface 500x180 mm Table travel X x Y 280 x 175 mm Gbjdpjt Ed Erofx Afneh Motor power 600 W Mains connection 230/50 V/Hz Cubature 500x180x375 mm Length x width 745 x 570 mm Height 935 mm Weight 103 kg

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Gjdpfx Aetr Ud Sofnebh Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 - workshop overhauled Mechanically and electrically inspected and function tested by our JUNG specialists Wear parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange. Gbedpfx Afjwz Hf Nonjh

Condition: new, The Mark Super SV, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super SV ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated depth display, making it ideal for both single-piece machining and small series production. The digital display provides critical information like spindle speed, enhancing operational efficiency and reducing error rates. Standard equipment includes a 3-axis position indicator and a 13 mm drill chuck, ensuring that you have everything needed for high productivity. After 15 years, the Mark Super SV remains a top choice for workshops and training departments. Request a quote today to explore the capabilities of this reliable mill drill in the Milling Machines category. Gbsdpfx Ajqcuc Eefnjh

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Gbodpod I A Auofx Afnsh Distance between Center 2000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm