Extruder

KraussMaffei KMD-2-50-KK

Condition: good (used), Year of construction: 1996, operating hours: 62,590 h, screw conveyor diameter: 50 mm, screw conveyor length: 1,300 mm, Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Djdpeh Nmt Dsfx Acpecn Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Magnetic grid 200x200mm High-quality cabinet construction completely closed Dcjdpfx Acodtdwaspjn Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Dedpeihf Ufofx Acpecn Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: as good as new (ex-display), Year of construction: 2022, overall weight: 68 kg, pressure: 10 bar, input voltage: 230 V, hose package length: 5,000 mm, CRYONOMIC COB62+ dry ice blaster. Demo machine used for presentations by the distributor in Poland, condition like new. Used for about 20 h of demonstrations. Included in the scope of supply: machine, 5m hose, gun with standard nozzle. Max. blasting pressure: 10 bar. Air consumption: 0,5 - 5,5 m3/min. Dry ice consumption: 20 - 80 kg. Possibility to use additional abrasive module for more aggresive cleaning with abrasive. Possibility to use LED gun light. Dcjdpfxeq Rvakj Acpsn Simple and reliable operation and design backed by over 30 years of experience in manufacturing dry ice cleaning equipment. Manufactured in Belgium.

Condition: used, Stretch blow molding machine by Etek ISBM line = Injection stretch blow molding Dcedpfx Acjkucxlspon Stretch blow molding machine for single-use PET bottles made from PET preforms Stretch blow molding machine for production using the rotary process Manufacturer: ETEK / GF-Industries, Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 volts, 50 Hz Weight: approximately 6000 kg In like-new condition

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Dcedpfx Aeu Ttf Necpsn Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Dedpfoug Edksx Acpocn Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Dodpfx Acspdr Aispecn Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Dcsdpoivpthefx Acpjn Model -WL6S Main motor -22kw

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm blade shaft Ø: 165 mm Dcjdsd Ha Hmspfx Acpon speed: max. 150 m/min