Empty bottle inspector

Krones

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones - Model: Variojet - Year of manufacture: 2007 Bwsdsz Hai Tepfx Aknju - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, empty load weight: 1,450 kg, For sale is a Jumag steam generator with oil burner. Optionally available with gas burner upon request. The unit is in very good condition. Model DG 560. Year of manufacture: 2011. Steam output: 560 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Please contact us with any questions. Bodpfx Aksydnzienewu

Condition: used, Year of construction: 2000, machine/vehicle number: 690-264, Machine: KRONES KGW-65-S-E Crate washer Bjdpfx Ajz Icnzsknswu

Condition: used, Year of construction: 1987, with 2 stations photo-oriented working direction: left-right Capacity: 8000 bph Bjdpoz Icftsfx Aknewu

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Bodpfx Aketuyq Rsnswu

Condition: used, *consisting of: * - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour *Details*: Bodjz Ibidepfx Aknowu - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Condition: used, Year of construction: 2003, machine/vehicle number: RV150, Consisting of: - Rinser 20 nozzles Bwodpfx Asz Iavveknou - Filler 20 valves - Natural corker for 3 heads - Screw capper for3 heads 28x32 MCA Capacity: 3500 bph

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Bwedpfx Ashix Ukoknju

Condition: used, Year of construction: 2019, Overview This Krones VarioFlash B is a flash pasteurization system for beer and beer mix beverages, built in 2019 by Krones AG at its Steinecker plant in Freising, Germany. It pasteurizes 20 - 45 hl/h in a three-stage plate heat exchanger with energy recovery, a heat retention tube and a cooling stage. Everything is mounted on a stainless steel skid with a horizontal 2,100 l buffer tank, and a freestanding stainless steel control cabinet with touchscreen HMI completes the system. Technical data Bsdpfsz Ekdxsx Aknswu - Manufacturer: Krones AG (Werk Steinecker, Freising, Germany) - Model: VarioFlash B with cooling stage - Year of manufacture: 2019 - Machine type: flash pasteurizer with plate heat exchanger - Products: beer, beer mix beverages - Capacity: 20 - 45 hl/h - Pasteurization temperature: 71 - 85 °C - Holding time: 30 s at 45 hl/h - Max. CO₂ content: 6.5 g/l - Product inlet temperature: 5 - 15 °C; product outlet temperature: 16 °C - Energy recovery: approx. 91 % - Heating requirement at 85 °C: approx. 51 kW (approx. 90 kg/h steam at 6 bar(g), 165 °C) - Cooling requirement with water circulation at 5 °C: approx. 38 kW (5 m³/h glycol water, 2 - 10 °C) - Process water: inlet pressure 4.0 bar(g), inlet temperature 6 - 15 °C - Buffer tank: 2,100 l, max. allowable pressure -1.0 / +7.0 bar, allowable temperature -4 to +98 °C, CE marked Equipment - Plate heat exchanger with 3 stages: energy recovery, pasteurization with temperature control, cooling with temperature control - Heat retention tube with fixed length; PU control depending on temperature and flow rate - Hot water circuit with separate brazed plate heat exchanger, temperature control, circulation pump and expansion vessel - Sanitary product pumps: frequency-controlled product feed pump, booster pump for a positive pressure difference towards the unpasteurized product, frequency-controlled product pump to the filler - Horizontal stainless steel buffer tank, pneumatic valves, inline instrumentation and sanitary pipework on a tubular stainless steel frame - Freestanding stainless steel control cabinet with touchscreen HMI and main switch Condition Used. The system has been removed from production and is stored indoors. It can be inspected by appointment. Availability Immediately. Location: Germany.

Condition: used, Year of construction: 2012, Overview Complete Krones PET line from 2012 for carbonated water in non-returnable PET bottles of 0.5 L, 1.0 L and 1.5 L, rated at 16,000 bottles/h on the 1.5 L format. The line runs from preform feeding through a blow moulder-filler-capper bloc in a clean room, beverage treatment and CIP, inspection, drying, coding and wrap-around labelling, to shrink-film packing with handle application, palletizing and stretch wrapping. A separate sleeve section with sleeve labeller, steam shrink tunnel, inspection and two dryers is included. Technical data - Year of manufacture: 2012 - Output: 16,000 bottles/h (1.5 L) - Product: carbonated water - Bottles: PET, 0.5 L, 1.0 L and 1.5 L - Labeller: up to 20,000 bottles/h - Packer, palletizer and stretch wrapper: up to 24,000 bottles/h - Packs: shrink-film packs with carry handle, 3x2 and 4x3 - Pallets: 800 x 1200 mm and 1000 x 1200 mm - Electrical: 380/220 V, 3/N/PE, 50 Hz Scope of Delivery - Preform feed unit | Krones | CONTIFEED | with tilting device for the preform hopper | 2012 - Preform interior cleaning | Krones | PREJET | 2012 - Stretch blow moulder | Krones | CONTIFORM S8 | 16,000 bottles/h (1.5 L) | 2012 - Filler-capper | Krones | MODULFILL VFS | 60 filling valves, 16,000 bottles/h (1.5 L) | 2012 - Clean room | Krones | for the blow moulder-filler-capper bloc | 2012 - Closure conveyor | Krones | 2012 - Beverage treatment | Krones | CARBOFLOW | 2012 - CIP system | Krones | VARIOCLEAN | 30 m³/h | 2012 - Container conveyors | Krones | SYNCO | 2012 - Inspection machine | Krones | CHECKMAT 707 | 2012 - Container dryer | Krones | LINADRY | 2012 - Container coding | Videojet | inkjet coder | 2012 - Labelling machine | Krones | CONTIROLL COMBI | wrap-around OPP labels, up to 20,000 bottles/h | 2012 - Inspection machine | Krones | CHECKMAT 731 | 2012 - Sleeve labeller | Krones | SLEEVEMATIC | 2017 - Steam shrink tunnel | Krones | SHRINKMAT - Inspection machine for the sleeve section | Krones | CHECKMAT - 2 container dryers for the sleeve section | Krones | LINADRY | 2017 - Pack conveyors | Krones | MULTICO | 2012 - Shrink-film packer | Krones | VARIOPAC PRO FS | 3x2 and 4x3 packs, up to 24,000 bottles/h | 2012 - Handle applicator | Krones | VARIOSTICK | 2012 - Palletizer | Krones | MODULPAL | 800 x 1200 and 1000 x 1200 mm pallets, up to 24,000 bottles/h | 2012 - Pallet conveyors | Krones | PALCO | 2012 - Stretch wrapper | Robopac | 2012 Bodpfx Akez Dw Uuenswu - Electrical power distribution for the line | Krones | 2012 Condition Dismantled and stored. Inspection on site by appointment. Availability Available immediately. Location: Georgia.

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 Bwedovrfivjpfx Aknsu - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: K787016, overall weight: 41,000 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 800 A, operating pressure: 40 bar, control voltage: 24 V, type of input current: three-phase, Equipment: documentation/manual, Krones Contiform S20 PET stretch blow molding machine – 20 cavities, output up to 40,000 units per hour. Used Krones Contiform S20 machine for manufacturing PET bottles. The machine is completely disassembled and prepared for loading onto a truck. Due to its disassembled condition, it is not possible to perform a test run or functional tests – it is sold as a complete set of components for reassembly by the buyer. Technical specifications: Bodez Euubepfx Aknowu • Manufacturer: Krones • Model / Year: Contiform S20 / [2003] • Number of cavities: 20 • Nominal output (according to the manufacturer's specifications): up to 40,000 bottles/hour • Maximum container volume: up to 3 l (depending on the shape) • Oven: linear, with a 40 mm stroke • Neck size: 26/22 (PCO 1881) Scope of supply: [preform feeder, hopper/elevator and orienting device, chiller, molds, spare parts, etc.] Inspection possible by prior arrangement – the machine can be inspected in its disassembled state, with the components laid out in Kutno. Loading at the buyer's expense. Transport to be agreed. Price on request.

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Bodpfx Aevddkvsknjwu Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Year of construction: 2016, condition: good (used), Item: M-3525-APV-Pump-W+65/350-235 STD APV Centrifugal Stainless Steel Pump Type: W+65/350-235 STD, Year: 2016 2 pieces identical! 11 kW, 1450 Rpm Bedokt Upnspfx Aknswu Used!

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Bedezzz N Hopfx Aknswu Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.