Universal Tool Room Milling Machine

Kunzmann WF 7/3

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Crodpfx Aswq Ndgjpvsc Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm Codpeyb Sx Tefx Apvorc distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 370483, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN TNC 124, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Table length: 800 mm Table width: 425 mm Max. workpiece weight on table: 250 kg Distance between vertical spindle and table: 560 mm Spindle taper: SK 40 Max. spindle speed: 5,000 rpm Swiveling range vertical milling head: ± 90° Feed rates: up to 2,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Vertical quill stroke: 60 mm Cjdpfjyhnmtsx Apverc MACHINE DETAILS Control: HEIDENHAIN TNC 124 Connection: 50 Hz 3x 400 Volt Milling spindle motor: 5.5 / 7 kW Total power consumption: 15 kVA Dimensions & Weight Machine weight: approx. 1,800 kg Dimensions (L x W x H): 2,100 x 1,800 x 2,050 mm EQUIPMENT Rigid angle table Electronic handwheel Heidenhain probe Vertical milling head Full splash guard cabin Coolant system Machine lamp

Condition: used, Year of construction: 1996, functionality: fully functional, Universal Milling Machine Kunzmann WF7/3 CNC with Heidenhain TNC 124 Control – Excellent Condition!! Technical Data: • Year of manufacture: 1996, Machine No. 370173 • Rigid angle table • Infinitely variable spindle speed up to 3,700 rpm • Feeds on 3 axes, continuously variable from 0 to 1,000 mm/min • Travel distances X/Y/Z: 600/400/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table surface: 650 x 350 mm • Table load capacity: 300 kg • Vertical quill stroke: 60 mm Credpfx Ajw Rx Tijpvjc • Vertical and horizontal quill – SK40 • Hydraulic tool clamping system • Weight: approx. 1,800 kg • Space requirement: approx. 2.3 x 2 x 2 m • Main drive motor: 4 kW • Total power consumption: approx. 7 kVA Features and Equipment: • Heidenhain TNC 124 CNC control • Hydraulic clamping for vertical and horizontal operations • Automatic central lubrication • Spindle brake • Technical documentation, spare parts lists, control manual, and programming examples • Full safety enclosure • Coolant system • Electronic handwheel About the machine: For sale is a Kunzmann WF7/3 universal milling machine equipped with a Heidenhain TNC 124 CNC control. This universal milling machine is in outstanding condition. It comes from an automotive manufacturer where it was used only sparingly for training purposes. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal modes. Switching from vertical to horizontal operation is easy, achieved by simply swiveling the vertical head aside. The guideways are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected at our facility. Take the opportunity to view and test the Kunzmann under power at our location.

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm Crsdpfx Asflrg Topvsc table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 370791, feed length X-axis: 800 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, table width: 420 mm, table length: 800 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm X-axis feed rate: 2,000 mm/min Y-axis feed rate: 2,000 mm/min Z-axis feed rate: 2,000 mm/min X-axis rapid traverse: 5,000 mm/min Y-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 4,000 mm/min SPINDLE Spindle speed: 1 - 4,500 rpm Tool holder: 40 mm Speed range 1: 1 - 1,125 rpm Speed range 2: 1,125 - 4,500 rpm TABLE Table width: 420 mm Table length: 800 mm MACHINE DETAILS Total height: 2,000 mm Total width: 1,750 mm Total length: 1,750 mm Total weight: 1,800 kg Machine weight: 2,025 kg Input frequency: 50 Hz Operating voltage: 400 V Power consumption: 13 kVA EQUIPMENT Codpfswvi T Esx Apvorc - The machine vice visible on the table surface is not included in the scope of delivery.

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Crsdpfx Aex Emviopvsc #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Each of our welding rotary tables is designed in-house and manufactured with high quality components. We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. Credpfx Apog Urz Hevjc The new generation APSI are already in stock.

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x Plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter system for outdoor installation Credpfx Apjytqmmevec 1 x Nesting program on the machine control system Availability: immediately 3626ä

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC Codpjvu E Nujfx Apvjrc unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth