Surface Grinding Machine - Horizontal

Mägerle F 10

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW Todpeyv Ipfjfx Aqxja spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: repair required (used), Manufacturer: Delta Year of manufacture: 1988 Machine number: 284237 Type/Model: D 140 Centre distance: 700 mm Todpfjyt Ex Dex Aqxoa Passage: 38 mm Centre height: 150 mm Swing diameter over bed / over cross slide: 300 mm / 180 mm Speed range: 34 to 1,800 rpm Feed longitudinal / cross: 0.038 to 1.048 mm/rev / 0.019 to 0.524 mm/rev Connection: Accessories/Equipment: 4-position tool holder, change gears, 160 mm 3-jaw chuck, 200 mm 4-jaw chuck Condition: In need of repair Damage: Transport damage, see pictures g + h, handwheel newly welded, gear lever broken off Weight: approx. 1.2 t Dimensions: 1,800 x 700 x 1,200 mm

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm Tjdpfjvr Hgvex Aqxsa surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Tjdpfx Aqocc D Ddoxoa Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Tjdpfxjdkdi Tj Aqxoa Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: reconditioned (used), EWAG WS 11 is a Tool and cutter grinder designed for precision, high accuracy and reliability. X/Y/Z travel 100 mm; grinding-wheel Ø75 mm; A axis -135°/+30°; workspindle 100–1300 rpm; vertical head travel 100 mm; collet nose 20 W. Wheel spindle 2500–7100 rpm; 380 V 60 Hz; 0.4 CV; ~350 kg; 1000×1000×1800 mm. Accessories: set of collets, flanges, wheel arbors, lamp, Z feed unit. Achieves tight tolerances; suited to automotive, aerospace, watchmaking, medical sectors. Tsdjyxnz Tspfx Aqxoa

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Tedpfx Aqsxq E Daoxoa

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Todpfx Aqswb Hygexja Acceptance at our premises Shipping according to your specifications

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW Tjdewgnz Ajpfx Aqxja voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm Tedpfx Aqocdi D Doxja electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C