Universal milling and drilling unit

KUNZMANNWF 4/3

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 1270 x 130 Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Useful length : 1270 mm Top roller diameter : 130 mm Fpedpfsiffwqox Aarsd Side rolls diameter : 130 mm Motors total power : 3,3 KW Working speed : 5m/min. Weight : 2150 kg Dimensions (mm) : 3200 x 1150 x 1110 (L x W x H) Bending power : 5mm Bending capacity : 4mm All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Condition: used, Year of construction: 2007, container length: 40 ft, color: light grey, overall weight: 30,480 kg, empty load weight: 3,745 kg, loading space volume: 67.7 m³, loading space width: 2,352 mm, loading space length: 12,032 mm, loading space height: 2,390 mm, Dear Sir or Madam Thank you for your interest in containers from MT CONTAINER GmbH in Hamburg. Sea containers are wind and watertight large-capacity containers for the transportation of goods by sea, land or air freight. The ISO-standardized containers can be loaded, unloaded and stacked particularly quickly and easily. High Cube containers are the same size as a standard container. They are just as wide as they are long, but they are constructed higher. This gives them a higher volume for more payload. In contrast to standard containers with a height of 2591 mm, high cube containers have a height of 2896 mm. _____ This container is a: 40 foot HC container _____ Our containers have the following features: ✅ tested ✅ Valid CSC sticker (TÜV for the box) ✅ Painted in light grey (desired color possible) ✅ Wind and waterproof ✅ Odorless _____ Our containers have the following dimensions: External dimensions ■ L 12192 mm x W 2438 mm x H 2896 mm Fpjdeh Hm U Hspfx Aarsd Internal dimensions ■ L 12032 mm x W 2352 mm x H 2698 mm Door dimensions ■ L 2340 mm x W 2585 mm Volume ■ 76.4 m³ Euro pallets ■ 25 Further information: Unladen weight ■ 3880 kg Payload ■ 28620 kg Total weight ■ 32500 kg Transport goods: Dry cargo transport _____ ⭐ Extra service ■ Expert advice free of charge ■ Transport and delivery with or without unloading the container can be organized for an additional charge ■ Steel frame, stainless steel walls & aluminum floor ■ Can be painted in desired color / RAL tone ■ Lighting installation and electronic equipment possible ■ Drive-on ramp on request ■ Container supports possible ■ Accessible with pallet truck and forklift _____ ■ Prices are net without VAT. ■ Sales stocks change daily, please ask for a quote ■ The photos shown serve as sample images _____ Do you have any questions or concerns regarding containers or would you like a non-binding offer? Then give us a call or send us your inquiry. We also look forward to your visit to our beautiful container depot in the Port of Hamburg. _____ *Important note: The imprint, the information and the link to the platform of the EU Commission for online dispute resolution, the general terms and conditions with customer information and data protection information as well as the revocation instructions and the sample revocation form can be accessed by clicking on "Legal information". This advertisement serves exclusively as a basis for subsequent contract negotiations. It constitutes neither a binding offer nor an invitation to submit such an offer. If the product has aroused your interest, please send us a non-binding message by [email], [telephone], [fax], [letter] to the contact details given under "Legal information" or [via the "Send message" function], stating your [email address], [fax number] or [postal address]. We will then submit a binding offer to you and send you our General Terms and Conditions with customer information as well as a copy of the contract.

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm Fpodpfx Aowhk Ubearod - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: new, Year of construction: 2025, Genie GS3246 E-Drive electric scissor lift, new, used - demonstration machines available Fodpfx Aasrqfnferepd

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request. Fsdpsbqt Arofx Aarspd

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm Fjdpfxewuurws Aarepd From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Fpedpfx Aasfk Et Ajred Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations Fodpfx Aovr Eh Eoarspd • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Fedpfx Asg Npiwsaropd Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: used, mileage: 64,129 km, power: 120 kW (163.15 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,850 mm, total width: 2,130 mm, total height: 2,300 mm, loading space length: 4,980 mm, loading space width: 2,100 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Complete rig with high-quality Fitzel body on Sprinter and trailer. Equipment: * Air conditioning, heated driver's suspension seat, * Double passenger seat, * 7G-Tronic Plus automatic transmission with cruise control, * Tow bar (3,500 kg) with 13-pin trailer socket, * Fuel tank: main tank 100 L, * Rear wall paneling, * Thermal insulation glazing, * Double passenger seat, Technology/Electrics/Comfort: * Becker MAP Pilot navigation system, * Outside temperature display, * Roof control unit with reading lights for driver and passenger, * Preparation for digital tachograph, * Electrically adjustable and heated mirrors (both sides), * Additional (reinforced) battery, * Isolation relay for additional battery, Safety/Environment: * Bi-xenon headlights with cornering lights, * Driver's airbag, * Brake assist, * Braking system with ABS + ASR, * Hill start assist, * Chassis for application B: reinforced front and rear stabilizers, reinforced shock absorbers, reinforced front axle, * Low emissions according to Euro 6 standard, Fpsdoqu Hztepfx Aarod Miscellaneous: * Wheelbase: 4,325 mm, * Engine: 2.1 L - 120 kW CDI CAT, * Payload: 1,460 kg according to registration certificate, * Gross vehicle weight: 3.50 t Including matching Fitzel 3-axle vehicle transporter trailer, Fitzel 35-23/83T, * Loading area: 8,280 mm x 2,300 mm, * Loading height approx. 680 mm, * Overrun brake, * Certified for 100 km/h, * Loading ramps, * Knott axles, * Tire size: 195/55R10C, * Payload: 2,610 kg, * Gross weight: 3,500 kg Since 1972, your reliable partner for all things automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special low rates. If you are interested, we are happy to prepare an individual offer! We welcome your trade-in of commercial vehicles/construction equipment. If a new TÜV inspection is needed, we gladly provide a quote from our partner workshops. Our offer generally does NOT include new TÜV inspection. Delivery of your 'new' commercial vehicle by our external partners is possible for an additional fee. The information contained in advertisements, on the internet, price tags and images are non-binding descriptions and do not represent guaranteed features. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be verified separately. Subject to errors and prior sale.