Bar feeder

KUPA ServoFeed

Year of construction: 2003, condition: ready for operation (used), A Kupa short bar loader is available. Feed length: 1750mm, max. bar length: 1500mm, bar diameter range: 4mm-85mm, power requirement: 1kW, machine dimensions X/Y/Z: approx. 1900mm/900mm/1600mm, weight: approx. 400kg. On-site inspection is possible. Fsdpfxovf Iznj Afnspc

Year of construction: 2016, condition: excellent (used), 1 used short bar loader make Breuning Fpedpfoht Rl Eox Afnoc type ILS RBL 80/12 Year 2016 clamping range 5-80 mm diameter Length 100-1200 mm

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Fedpfx Ajufp Svefnepc Parts shown by hand not come.

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm Fedpfx Ajwzx Nmofnopc table surface area: D 700 x 500 mm turning speeds: 42.000 1/min tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) *

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231419, As-new, completely overhauled CNC 5-axis vertical machining centre DMG DMU 40 eVo linear, year of manufacture 2012, IntNr231419 Control system Brand: HEIDENHAIN Model: 530 Main drive Spindle speed range: 14,000 rpm Number of axes: 5 Travel distances X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 375 mm Includes: - Automatic tool changer with 120 SK 40 tool holders - Table rotary feed-through for workpiece clamping - Side door for robot loading - Renishaw tool breakage monitoring - Heidenhain measuring probe - High-pressure coolant system (IKZ) with 600 l tank - Emulsion extraction system - Active spindle cooler - Linear drives for X and Y axes - Glass scales The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications! Fjdsydnncopfx Afnjpc

Condition: good (used), Year of construction: 2001, MACHINE SPECIFICATIONS Control: HEIDENHAIN Machining area: X axis: 500 mm Y axis: 420 mm Z axis: 380 mm Main drive: Speed range: 20 – 18,000 rpm Power (40/100% ED): 35/25 kW Torque (40/100% ED): 130/87 Nm Feeds: Working feeds (X/Y/Z): 20-20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work table (B+C axes): Table dimensions: Ø 500 x 380 mm Fodjxq Hb Topfx Afnopc Maximum weight on table: 200 Kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360º (resol. 0.001º) B-axis travel: 180º (resol. 0.001º) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2.470 mm Machine weight: 5.020 Kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Cooling fluid through the chuck Automatic tool changer: ATC-32 - Maximum tool weight / Maximum tool diameter: 6 Kg / 200 mm Chip evacuator Electronic handwheel: HR-410 High capacity cooling system: Interlit SUK-200-900 Equipped with Reninshaw probe interface: probe included

Condition: used, Year of construction: 1993, pressure 63 t stroke 10 - 80 mm no. of strokes 75 - 400 /min distance between columns 1080 / 920 mm dayligth (stroke and adjustment up) 450 mm column travel -side 300 mm Fjdpevut Ixofx Afnspc table surface area 1000 x 550 mm hole in the table 700 x 160 mm table height over floor 1080 mm ram surface 900 x 450 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1,0 – 9999,9 mm power requirement 11,0 kW Weight 9,5 t dimensions of the machine ca. 2,8 x 2,7 x 3,1 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (make Ortlinghaus), manual stroke adjustment, motoric ram adjustment, motoric circular oil lubrication, pneumatic counterbalance in ram electronic servo-roll feed Kaiser KWV 250

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. Fsdpfx Asdzqn Dsfnopc The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Machine parameters: Travels in X, Y, Z axes: 650X450X450 mm Description: Fpodsyg R S Aepfx Afnjc The machine is in good technical condition; test runs are possible by prior arrangement. HSK 63. Heidenhain 426/430. - The current condition corresponds to the machine's age, and there are currently no issues. X-axis ball screw was replaced on 5.1.2022. Hydraulics were overhauled on 25.4.2024. - Spindle hours: 41,273, machine hours: 89,892 - Number of axes: 5. Video of the machine available on request.

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Fjdpfx Aoydn E Isfnjpc Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.